Aug 29, 2024 Leave a message

Reasons for welded steel pipe diameter overrun defects

(1) strip steel "crescent bend" is a very big influence on the spiral submerged arc welded pipe diameter. In the production process, in the molding angle remains unchanged, in order to prevent the wrong side can only be changed by changing the pipe diameter to eliminate the "crescent bend".
(2) The strip working width or molding angle is not appropriate.

ssaw pipe
(3) The resistance of the molding process is the main factor in determining the size of the pipe diameter. In the strip working width and molding angle to determine the size of the resistance in the molding process will play a leading role. Practical experience shows that: resistance and pipe diameter is directly proportional to the resistance, that is, when the resistance is large, the pipe diameter increases, resistance when the pipe diameter becomes smaller. In the molding process, when the average value of the steel pipe elasticity is zero, if the pressure pressure roller or raise the welding pad roller, will make the resistance increase, then the diameter of the pipe increases; Conversely, the diameter of the pipe becomes smaller.

sprial welded steel pipe
(4) The delivery side of the pre-bending amount increases, the pipe diameter also increases; Conversely, the free side of the pre-bending amount increases, the pipe diameter becomes smaller.
(5) Continuous positive wrong side, the pipe diameter increases; continuous reverse wrong side, the pipe diameter becomes smaller.

Send Inquiry