Aug 30, 2024 Leave a message

Piping Standards Quick Reference: Chinese, ASME, ASTM and API Codes

Piping standards are organized in layers, and a single pipe project can reference four different families at once: a material standard that defines the steel, a dimensional standard that fixes the sizes, a design code that sets allowable stresses, and an administrative code that governs licensing. This quick reference groups the most frequently cited piping standards for steel pipe into their families so that procurement engineers can find the right document without guessing.

1. Chinese Standards

The Chinese pressure piping system is administered under the Special Equipment Safety Law, with TSG D2001 as the manufacturing license rule for pressure piping components. Material and product standards then cover the individual pipe applications:

Standard Scope
TSG D2001 Manufacturing license rules for pressure piping components
GB 3087 Seamless steel pipe for low and medium pressure boilers
GB/T 3091 Welded steel pipe for low pressure fluid transportation
GB 5310 Seamless steel pipe for high pressure boilers
GB 6479 Seamless steel pipe for high pressure fertilizer equipment
GB/T 8163 Seamless steel pipe for fluid conveyance
GB/T 9711 Steel pipe for pipeline transportation systems in the oil and gas industry
GB 9948 Seamless steel pipe for oil cracking

In practice, the grade letters carry the information: GB 3087 pipe is used for boiler drums and headers up to medium pressure, GB 5310 for superheater and main steam lines at high pressure, GB 6479 for hydrogen and ammonia service in fertilizer plants, GB/T 8163 for general fluid lines, GB/T 9711 for cross-country oil and gas pipelines and GB 9948 for refinery furnace and cracking service.

2. American Society of Mechanical Engineers (ASME)

ASME publishes the design codes and dimensional standards that govern American-style piping systems:

ASME B1.20.1 - Pipe threads, general purpose, inch;

ASME B16.25 - Butt welding ends for pipe, valves and fittings;

ASME B31.1 - Power piping, covering boiler external piping and power plant systems;

ASME B31.3 - Process piping, covering chemical and petroleum refinery plants;

ASME B36.10M - Welded and seamless wrought steel pipe dimensions, the source of schedule numbers such as Sch 40 and Sch 80;

ASME B36.19M - Stainless steel pipe dimensions.

B31.1 and B31.3 are the two codes that set allowable stresses, wall thickness and testing requirements for pressure piping. B36.10M is the dimensional backbone of the schedule system: the outside diameter is fixed for each nominal size, and the schedule number defines the wall thickness. B16.25 governs the bevel geometry of butt weld ends, and B1.20.1 governs tapered pipe threads for smaller connections.

3. American Society for Testing and Materials (ASTM)

ASTM material standards define the chemistry, mechanical properties and testing of the pipe itself:

ASTM A53 - Welded and seamless steel pipe, black and hot-dip galvanized, for mechanical and pressure applications;

ASTM A106 - Seamless carbon steel pipe for high-temperature service;

ASTM A153 - Zinc coating (hot-dip) on iron and steel hardware;

ASTM A312 - Seamless and welded austenitic stainless steel pipe;

ASTM A333 - Seamless and welded steel pipe for low-temperature service;

ASTM A335 - Seamless ferritic alloy steel pipe for high-temperature service, the home of the P11 and P22 CrMo grades;

ASTM A358 - Electric-fusion-welded austenitic chromium-nickel alloy steel pipe for high-temperature service.

The ASTM family is organized by service rather than by material family alone: A53 and A106 cover carbon steel, A333 covers low-temperature carbon steel, A335 covers high-temperature alloy steel, and A312 and A358 cover austenitic stainless steel in seamless and welded forms respectively. When the ASME code is involved, the corresponding SA specifications (such as SA-106 and SA-335) apply, and the pipe must carry the applicable code stamping and documentation.

4. American Petroleum Institute (API)

API SPEC 5L is the specification for line pipe, covering seamless and welded pipe for the oil and gas pipeline transportation system. It defines the PSL1 and PSL2 product specification levels, the grade system from Grade B through X80 and higher, and the additional requirements for sour service, offshore service and low-temperature toughness. API 5L is the standard cited by ASME B31.4 (liquid transportation systems) and B31.8 (gas transmission and distribution systems) for the pipe material in cross-country pipelines.

How the Four Families Work Together

A typical procurement example shows how the layers combine. For a refinery process line, the design code is ASME B31.3, which fixes the allowable stress and required wall thickness. The material is specified to ASTM A335 P22 (or SA-335 in code jurisdictions), which defines the CrMo chemistry and high-temperature properties. The dimensions are taken from ASME B36.10M, so the outside diameter and schedule are standardized, and the end preparation follows ASME B16.25. On the Chinese side, the equivalent project may reference GB 5310 for the material and TSG D2001 for the manufacturing license, with the same dimensional logic applied through the GB/T 17395 dimension standard. Reading the standard families side by side is the fastest way to avoid mismatched specifications.

Frequently Asked Questions

What is the difference between GB 3087 and GB 5310?

GB 3087 covers seamless steel pipe for low and medium pressure boilers, while GB 5310 covers seamless steel pipe for high pressure boilers. The high-pressure standard has tighter chemistry limits, additional testing requirements and higher-temperature design data.

What is ASME B31.3 used for?

ASME B31.3 is the process piping code, governing the design, materials, fabrication and testing of piping in chemical and petroleum refinery plants. It sets the allowable stresses and wall thickness requirements for process piping systems.

What is the difference between ASME B36.10M and B36.19M?

ASME B36.10M covers welded and seamless wrought steel pipe dimensions, including the standard schedule numbers for carbon steel. ASME B36.19M covers stainless steel pipe dimensions, which use the same outside diameters with different, thinner wall series.

Which standard governs line pipe for oil and gas pipelines?

API SPEC 5L governs line pipe for oil and gas transportation systems. On the Chinese side, GB/T 9711 covers the same service, and both are cited by the corresponding pipeline design codes for cross-country transmission.

What is the difference between ASTM A53 and ASTM A106?

ASTM A53 covers welded and seamless steel pipe for mechanical and pressure applications in lower-temperature service and is also available galvanized. ASTM A106 covers seamless carbon steel pipe specifically for high-temperature service, with tighter requirements and no welded option.

What does TSG D2001 require?

TSG D2001 is the manufacturing license rule for pressure piping components in China. Manufacturers producing pipe, fittings and flanges for pressure piping must hold the appropriate license level under this rule, and the license scope must cover the product and specification being purchased.

Why is ASTM A335 important for high-temperature service?

ASTM A335 covers seamless ferritic alloy steel pipe for high-temperature service, including the CrMo grades P11 and P22. These grades provide the creep strength and hydrogen resistance required for boiler, refinery and petrochemical piping above the temperature limits of carbon steel.

Send Inquiry