1. Requirements related to the certification type
Voluntary GOST-R Certificate
If the steel pipe product does not belong to the category of industrial, pressure or gas pipelines, such as only for ceramic pipes, main pipelines and sewage pipes, etc., mandatory EAC certification is not required, but a voluntary GOST-R certificate is required.
Mandatory SGR State Registration
If the product is used for drinking water supply or supporting structures, mandatory SGR state registration is required. The SGR State Registration Certificate issued by Rospotrebnadzor ensures that the product does not contain any impurities that are harmful to health or life.
2. EAC Certification for Pressure Pipes
According to the bill adopted by the Customs Union, pipe products with a diameter of 25 mm and a pressure of more than 0.05 MPa are subject to mandatory quality inspection. According to TRCU032/2013 Customs Union Technical Regulations, requirements for products operating under overpressure are stipulated. EAC certificate or EAC declaration will be issued after passing the inspection. Pipe valves for industrial use must also comply with the list of TRCU032/2013 regulations. The law also stipulates that each manufacturer of pressure equipment must attach a data sheet that records the operating, technical and performance data of the equipment.
3. Product quality related requirements
Appearance and size
Steel pipe products are subject to appearance inspection, dimensional measurement and other inspections. For example, for steel long welded pipes applicable to GOST20295-85 standard, the diameter of the pipe ranges from 219 mm to 1420 mm, and the wall thickness ranges from 5 mm to 50 mm.
Mechanical properties
Strict inspections and tests such as mechanical properties tests are required, and the inspections and tests must be carried out in qualified laboratories to ensure accurate and reliable results. For example, ductile iron pipes must be tough, able to withstand environmental impacts and ensure smooth water flow; steel pipes must be able to maintain performance in extreme environments; welds of welded pipes should ensure fluid purity and safety.
4. Application document requirements
The following documents are required when applying for a GOST certificate: GOST certification application form, detailed product description, technical passport, product manual/instructions, test report. Other certificates such as ISO, DIN, CE, CB, etc. may require additional documents and certificates depending on the type of certified product.
5. Relevant requirements for manufacturers
Production conditions
The certification body will conduct an on-site audit of the company's production site to check whether the company's production conditions meet the certification requirements, including whether the company has suitable production equipment, sites, etc. to ensure product quality. 2.
Quality management system
Check whether the company's quality management system meets the certification requirements. The company needs to strengthen internal management and improve the level of product quality control, which will help establish a sound quality management system to meet the certification requirements.






