A691 CM65 CLASS11 Electric-Fusion-Welded High-Temperature Pipe
A691 CM65 CL11 pipe is an electric-fusion-welded (EFW) carbon-molybdenum pipe made from ASTM A204 Gr A pressure-vessel plate and built for high-pressure, high-temperature service. The "CM-65" grade delivers a minimum tensile strength of 65 ksi (448 MPa), and Class 11 means the pipe is supplied as-welded - no post-weld heat treatment - with radiographic examination of the longitudinal weld. It is the welded alternative to seamless A335 P1 where large diameters make seamless uneconomic.
ASTM A691 covers pipe 16 in. (406 mm) in outside diameter and larger, so A691 CM65 CL11 is a large-bore product: typical production runs OD NPS 16"–60" (406–1524 mm), wall 6.4–75 mm, lengths 5.8–12 m. It serves the same creep-resistant, high-temperature roles as its chromium-molybdenum cousins but at a lower alloy level, which keeps cost and weldability favorable. This page explains what the designation commits the mill to, why "Class 11" is frequently misunderstood, and how to write the specification so the pipe you receive matches the service.
Technical Specifications
The A691 CM65 dimensions below define the standard production envelope; larger outside diameters, heavier walls and longer or fixed lengths are available on request.
| Parameter | Capability |
|---|---|
| Standard | ASTM A691 / ASME SA691, Grade CM-65, Class 11 |
| Base plate | ASTM A204 / A204M Grade A (carbon-molybdenum, ½Mo) |
| Outside diameter | NPS 16"–60" (406–1524 mm) |
| Wall thickness | 6.4–75 mm (up to 3 in.) |
| Length | 5.8–12 m, random or fixed |
| Ends | Plain (PE) or beveled (BE) for field welding |
| Heat treatment (Class 11) | As-welded - no post-weld heat treatment |
| Weld examination (Class 11) | Radiographic examination required |
| Certification | EN 10204 3.1 / 3.2 MTC; third-party inspection available |
A691 CM65 Chemical Composition
CM-65 is ordered against ASTM A204 Gr A plate; the pipe product analysis must meet that plate specification. It is a carbon-molybdenum steel with no specified chromium - the "C" stands for carbon, not chromium.
| Element | CM-65 (max unless range) |
|---|---|
| Carbon (C) | 0.18% max |
| Manganese (Mn) | 0.90% max |
| Phosphorus (P) | 0.025% max |
| Sulfur (S) | 0.025% max |
| Silicon (Si) | 0.15–0.40% |
| Molybdenum (Mo) | 0.45–0.60% |
| Chromium (Cr) | Not specified (½Mo grade) |
Each controlled element has a job: molybdenum provides high-temperature strength and creep resistance; low sulfur and phosphorus protect weld toughness; the tight 0.45–0.60% molybdenum band is what makes the grade a ½Mo steel rather than plain carbon.
A691 CM65 Mechanical Properties
A691 CM65 mechanical properties are set by A691 Table 3 for the CM-65 grade, which is the 65 ksi (448 MPa) tensile level. Yield strength 255 MPa (37 ksi) is the specification minimum; A691 allows thickness-based reduction of yield for heavy walls, which is why some distributors quote a 220–290 MPa band.
| Property | CM-65 |
|---|---|
| Tensile strength | 415–550 MPa (60–80 ksi) |
| Yield strength (Rp0.2) | 255 MPa (37 ksi) min |
| Elongation | 20% min (50 mm / 2 in gauge length) |
| Hardness | 201 HBW max |
| Test standards | ASTM A370 (tension, bend); A691 hydrostatic/bend per class |
The elongation minimum of 20% is taken on a 50 mm (2 in) gauge length; reporting elongation against a different specimen length is a common source of apparent mismatch on mill certificates.
CM-65 vs CM-70 vs CM-75
When buyers compare A691 CM65 vs CM70, they are comparing the 65 ksi and 70 ksi tensile floors; the 75 ksi grade completes the family. All three share the same ½Mo chemistry, use A204 plate (Gr A / B / C) and carry the same 201 HBW ceiling. For CM65 equivalent grades outside the CM family, see the selection guidance below.
| Grade | Min tensile (MPa / ksi) | Base plate | Typical use |
|---|---|---|---|
| CM-65 | 448 / 65 | A204 Gr A | Moderate-temperature high-pressure pipe |
| CM-70 | 483 / 70 | A204 Gr B | Where a higher strength floor is specified |
| CM-75 | 517 / 75 | A204 Gr C | Highest CM strength level before Cr-Mo grades |
If the design needs chromium for oxidation or hydrogen resistance, move to the 1¼Cr (A387 Gr 11) or 2¼Cr (A387 Gr 22) A691 grades rather than staying in the CM family.
EFW A691 CM65 vs seamless A335 P1
A335 P1 is the seamless counterpart with the same ½Mo chemistry. A691 CM65 is chosen when the diameter exceeds what seamless mills can economically produce, or when a radiographed longitudinal seam with a known joint efficiency is acceptable to the design code. The trade is joint efficiency: welded construction applies a weld factor per ASME B31.3, whereas seamless does not.
A691 vs A672
Both are plate-derived EFW pipe, but A672 is electric-fusion-welded carbon steel for lower-temperature, moderate-pressure service and does not carry the Cr-Mo alloy grades. A691 is the choice when high-temperature creep strength and alloy chemistry are required. Select A691 CM65 when the line is hot and pressurized; select A672 when the temperature is moderate and the service is carbon-steel grade.
Applications
A691 CM65 CL11 is selected where the line is large, hot and pressurized and where a ½Mo steel gives enough creep resistance without paying for chromium. Five applications cover most orders:
Power generation - main and reheat steam lines
Utility and industrial boilers use CM-65 for main steam, hot reheat and boiler external piping at moderate steam temperatures where a ½Mo grade meets the design code without the cost of 1¼Cr or 2¼Cr.
Refineries and petrochemical process lines
High-temperature transfer lines, furnace outlets and catalytic-unit piping specify A691 CM65 when the temperature and hydrogen partial pressure stay within the ½Mo envelope.
Heat exchangers and fired heaters
Shell-side and header piping on fired heaters and exchangers uses the large diameters A691 provides, with the weld seam radiographed under Class 11.
Pressure vessels and headers
Vessel manifolding, steam drums external piping and high-pressure headers are fabricated from A691 CM65 plate-derived pipe for consistency with the vessel's A204/A387 material system.
High-temperature utility and process pipework
Plant pipework that must stay serviceable under sustained elevated temperature - but below the range needing 2¼Cr - is a common CM-65 application.
Quality Control and Testing
Radiographic examination (Class 11). The longitudinal weld is radiographed - this is mandatory for Class 11 and the main integrity check on the seam.
Tensile and bend testing. Each lot is verified by tension and bend tests per ASTM A370 / A691.
Plate and weld ultrasonic testing. UT of the base plate and, where specified, the weld zone supplements RT on critical orders.
Hydrostatic test. Not mandated by Class 11, but can be specified as a supplementary requirement on the purchase order.
Mill test certificate. EN 10204 3.1 or 3.2 documents chemistry, mechanical properties, heat treatment class and examination results.
Third-party inspection. TÜV, SGS, BV or client inspectors can witness testing and witness release.
Why Source A691 CM65 CL11 Pipe from GNEE
Integrated supply. We control plate sourcing, welding, examination and documentation so the heat traceability runs from plate to finished pipe.
Specification discipline. Every A691 CM65 pipe is supplied against the correct class and edition, with the common errors above eliminated from our data sheets.
Examination and certification. Radiographic examination per class, EN 10204 3.1/3.2 MTC, and third-party inspection (TÜV/SGS/BV) on request.
Export experience. GNEE serves 160+ customers across power, refinery and petrochemical projects, with documentation matched to destination-port requirements.
Technical support. Our team confirms grade, class and dimensions against your design code before the order is finalized.
FAQ
What does A691 CM65 CL11 mean?
A691 is the ASTM specification for electric-fusion-welded carbon and alloy steel pipe for high-pressure service at high temperatures. CM-65 is the grade: "CM" denotes a carbon-molybdenum (½Mo) steel made from ASTM A204 Gr A plate, and "65" is the minimum tensile strength of 65 ksi (448 MPa). CL11 (Class 11) means the pipe is supplied as-welded with no post-weld heat treatment, radiographic examination of the weld is required, and no hydrostatic test is mandated.
Is A691 CM-65 a chrome-molybdenum steel?
No. A691 CM-65 is a carbon-molybdenum steel - a 0.5% molybdenum grade based on ASTM A204 Gr A plate. It contains no specified chromium. The "C" in CM stands for carbon, not chromium. The chromium-molybdenum grades in A691 are the 1Cr, 1¼Cr, 2¼Cr, 5Cr and 9Cr designations, which are based on ASTM A387 plate. Calling CM-65 "chrome-moly" is a common but technically loose labeling.
What is the size range of A691 CM65 pipe?
ASTM A691 nominally covers pipe 16 in. (406 mm) in outside diameter and larger, with wall thicknesses up to 3 in. (75 mm). Typical production ranges are OD NPS 16"–60" (406–1524 mm), wall thickness 6.4–75 mm, and lengths 5.8–12 m. Sizes below NPS 16" are outside the nominal scope of A691 and belong to seamless or ERW specifications such as ASTM A335 or A53.
What is the difference between EFW and ERW for A691 pipe?
A691 pipe is electric-fusion-welded (EFW) with filler metal added - the longitudinal seam is made by a submerged-arc or other electric process that deposits weld metal. ERW (electric resistance welded) uses no filler metal and is a different process covered by other specifications. Describing an A691 CM65 pipe as "ERW" is incorrect; the correct term is EFW.
What is the difference between ASTM A691 and A672?
Both are electric-fusion-welded pipe made from plate, but A691 is for high-pressure, high-temperature alloy service and its grades include chromium-molybdenum steels with mandatory heat treatment classes. A672 covers electric-fusion-welded carbon steel pipe for lower-temperature, moderate-pressure service and does not carry the alloy Cr-Mo grades. Choose A691 when creep strength and high-temperature toughness are required.
What grade is equivalent to A691 CM65?
The base plate is ASTM A204/A204M Grade A; the pressure-equipment equivalents are approximately 15Mo3 (DIN 17155) or 16Mo3 (EN 10028-2), and JIS SCMV1. The seamless counterpart with the same ½Mo chemistry is ASTM A335 Grade P1. These are approximate cross-references, not one-for-one substitutions - confirm on the purchase order and by the applicable design code.
Is A691 CM65 a pipe or a tube?
ASTM A691 is a pipe specification. Buyers in boiler and heat-exchanger projects sometimes write "A691 CM65 CL11 tube," but the governing standard is pipe. The term "tube" in those contexts refers to the service (boiler tube, exchanger tube) rather than the A691 product form, which is welded pipe supplied to B36.10 dimensions.
How do I specify an A691 CM65 CL11 order?
State the standard and grade (ASTM A691 / ASME SA691, Grade CM-65), the class (CL11 = as-welded + RT, or CL42 if you require normalized-and-tempered plus hydrostatic test), outside diameter and wall thickness, length, end preparation (plain or beveled), any supplementary NDT or third-party inspection, and the destination port. Send these to our technical team for a quotation with lead time.
Hot Tags: A691 CM65 CLASS11 Electric-Fusion-Welded High-Temperature Pipe, China A691 CM65 CLASS11 Electric-Fusion-Welded High-Temperature Pipe manufacturers, suppliers, Electric Fusion Welding Pipe, ASTM A513 Mechanical Tube, EFW Pipe, Black With Blue Strip Pipe, Electrofusion Welding HDPE Pipe For Irrigation, SAW Pipe
Previous
A691 CM65 CLASS12 TUBEYou Might Also Like
Send Inquiry













