Mar 26, 2024 Leave a message

GI Hollow Pipe Sizes: Dimensions, Weights & Standard Chart

Understanding GI Hollow Pipe Sizing

Galvanized Iron (GI) hollow pipes are carbon steel pipes coated with a protective layer of zinc. In the global piping market, "GI" is a generic term often referring to pipes manufactured to BS 1387 (British) or ASTM A53 (American) standards. Accurate sizing is critical for ensuring flow rates and compatibility with threaded or grooved fittings in plumbing, HVAC, and light structural systems.

Standard Sizing Systems: Nominal vs. Actual

GI pipes are measured by their Nominal Diameter (DN or NPS), which is a rough indication of the internal bore, not the actual outside diameter. For example, a "1 inch" GI pipe (DN 25) actually has an outside diameter of 33.7mm. This allows for a consistent external dimension so that fittings can be interchanged across different wall thickness classes.

GI Pipe Size and Weight Chart (BS 1387 Class B/Medium)

Nominal Size (DN) Inch Equivalent Outside Diameter (mm) Wall Thickness (mm) Weight (kg/m)
DN 15 1/2" 21.3 2.6 1.21
DN 25 1" 33.7 3.2 2.41
DN 50 2" 60.3 3.6 4.47
DN 80 3" 88.9 4.0 8.36
DN 100 4" 114.3 4.5 12.20

Classification: Light, Medium, and Heavy

Under the BS 1387 standard, GI pipes are divided into three wall thickness classes, often color-coded at the pipe ends for easy identification:

Light (Class A): Brown ends. For low-pressure water and gas lines.

Medium (Class B): Blue ends. The standard for most industrial plumbing and firefighting systems.

Heavy (Class C): Red ends. Used for high-pressure mains and buried sections.

Theoretical Weight Calculation

To verify GI pipe quantity on-site, the following formula for carbon steel is used:
Weight (kg/m) = (OD - WT) * WT * 0.02466
The zinc coating typically adds 3–5% to this theoretical weight, which is accounted for in the manufacturer's shipping tolerances.

FAQs

Is 'GI Pipe' the same as 'Galvanized Steel Pipe'?
Yes. Historically, 'Iron' was used, but modern GI pipes are made of carbon steel.

What is the maximum length for a GI pipe?
Standard lengths are 6.0 meters (approx. 20 feet) to fit standard shipping containers.

Can GI pipes be used for gas lines?
Yes, they are standard for low-pressure gas distribution in many regions, provided they meet local safety codes.

Are GI pipe sizes compatible with PVC?
Generally no. PVC uses a different outside diameter system. Transition couplings (male/female adapters) are required to join GI and plastic lines.

How do I measure GI pipe size on-site?
Measure the Outside Diameter (OD) with a caliper and cross-reference the value against a standard size chart to find the nominal DN size.

Send Inquiry