Dec 31, 2024 Leave a message

What is the role of solid solution annealing treatment on A312 stainless steel welded pipe?

What is the role of solid solution annealing treatment on A312 stainless steel welded pipe?
A312 Austenitic stainless steel through solid solution treatment to soften, generally A312 stainless steel welded pipe heated to 950 ~ 1150 ℃ or so, hold a period of time, so that the carbide and various alloying elements fully and uniformly dissolved in austenite, and then rapid quenching and water cooling, carbon and other alloying elements too late to precipitate, to obtain a pure austenitic organization, called solid solution treatment.


The role of solid solution treatment has three points:

  • Make the steel pipe organization and composition uniform, which is particularly important for raw materials, because the rolling temperature and cooling speed of the various sections of hot rolled wire rod are not the same, resulting in inconsistent organization and structure.

At high temperatures, the atomic activity is intensified, σ phase dissolved, the chemical composition tends to be uniform, rapid cooling to obtain a uniform single-phase organization.

  • Elimination of work hardening for continued cold working.

Through solid solution treatment, the distorted lattice recovery, elongation and broken grain recrystallization, internal stress elimination, steel pipe tensile strength decreased, elongation increased.

  • Restore the inherent corrosion resistance of A312  stainless steel.

Due to cold working caused by carbide precipitation, lattice defects, so that the corrosion resistance of stainless steel decreased. Solid solution treatment of steel pipe corrosion resistance is restored to the best state.
For A312  stainless steel welded pipe, the three elements of solid solution treatment is the temperature, holding time and cooling rate. The solid solution temperature is mainly determined according to the chemical composition.

 A312 stainless steel welded pipe

Send Inquiry