Jul 16, 2025 Leave a message

What is astm A252 grade 3 pipe pile

A252Gr3 is a Grade 3 structural steel pipe material defined in the ASTM A252 standard, mainly used in engineering fields such as piling and foundation support.

‌ASTM A252 Gr3 Material Overview‌

A252 Gr3 belongs to the A252 standard formulated by the American Society for Testing and Materials (ASTM), which specifies the technical requirements for welded and seamless steel pipes used for pile foundations and structural supports. Grade 3 is a strength grade in this standard, and its specific characteristics are as follows:

‌Material composition‌: Usually carbon steel or low alloy steel, the specific chemical composition must meet the requirements of ASTM A252 for Grade 3. ‌‌

‌Mechanical properties‌:
Tensile strength is not less than 485 MPa. ‌‌

Yield strength may vary according to production standards, but must meet the load-bearing requirements of engineering structures.
‌Application scenarios‌: Widely used in scenarios such as building pile foundations, bridge supports, and offshore platforms that require high strength and corrosion resistance. ‌‌

‌A252 GR3 pipe piles

Production Process and Specifications‌

‌Manufacturing Process‌: includes straight seam welding (ERW) or seamless process, among which ERW welded pipes are more common due to their high cost-effectiveness. ‌‌

‌Specification Range‌: The outer diameter can be from 3/8 inch to 24 inches (about 17.1mm-610mm), the wall thickness is 1mm-22mm, and the length can reach 24 meters. ‌‌

‌Certification and Standards‌

‌International Certification‌: Certified by API, JIS, CE, etc., and in compliance with API 5L, EN10219 and other national standards. ‌‌

‌Quality Control‌: It must meet the requirements of ASTM A252 for weld strength, dimensional tolerance and non-destructive testing. ‌‌

Send Inquiry