Oil pipe buckles are important components used in the oil and gas industry to connect oil pipes, casings and other pipeline components. The following are several common types of oil pipe buckles:
1. Oil pipe buckle type
EU (External Upset) External thickening buckle type
EUE (External Upset End): External thickening end
EUP (External Upset Pin): External thickening male buckle
EUB (External Upset Box): External thickening female buckle
NU (Non-upset) No external thickening buckle type
NUE: Non-thickening end or non-thickening end
NewVAM buckle type
The characteristics are that the buckle cross-section is basically rectangular, the pitch interval is equal, the taper is not large, and there is no external thickening
2. Drill pipe buckle type
REG (API Regular Thread) Regular buckle type in API standard
Used to connect internal thickening drill pipes, forming a drill pipe joint with an inner diameter smaller than the inner diameter of the drill pipe thickening end, and the inner diameter of the drill pipe thickening end is smaller than the diameter of the drill pipe body
IF (API Internal Flush) API standard inner flat buckle type
Used to connect external thickening or external internal thickening drill pipe to form the inner diameter of the drill pipe joint, and the inner diameter of the thickened end of the drill pipe is equal to or close to the inner diameter of the drill pipe body
FH (API Full Hole) API standard through-hole buckle type
As the name suggests, the through-hole buckle is generally large, not the same as the inner diameter of the drill pipe body. Both are generally smaller than the inner diameter of the drill pipe body
3. Common buckle types for blind pipe screens
LTC (Long Thread Connector) long thread connection
The thread and STC thread have the same shape, but generally do not allow connection because the maximum torque values they can withstand are different
STC (Stub (Short) Thread Connector) short thread connection
Both LTC and LTC threads belong to API standard threads, the only difference is the length of the buckle, the longer one is LTC and the shorter one is STC
BTC (Buttress Thread Coupling) Trapezoidal thread coupling
It is easy to distinguish from LTC and STC, and it is very similar to NewVam. The only way to distinguish it is from the outer diameter and purpose of the pipe string
4. Common buckle types for sealing short sections
ACME trapezoidal thread
The cross section is mostly trapezoidal (approximately rectangular), the buckle is short, and there is usually an extension section without a buckle in front of the male buckle
5. Other buckle types
TSWP (BAKER OIL TOOL SWASH PIPE)
Used for flushing pipes and commonly used pipe strings for sand control completions. The main purpose is to serve as a flow channel for the filling fluid in the completion section
TSS (BAKER OIL TOOLS SPECIAL)
Another buckle for flushing pipes
Hydrill 511
Used for flushing pipes, 2-7/8" is generally Hydrill 511






