Aug 29, 2025 Leave a message

S30409 Steel Pipe

 

1. Material Definition and Standard Specifications
S30409 is a high-carbon austenitic stainless steel (corresponding to the Chinese designation 07Cr19Ni10). Its core characteristics are:

Composition Design:
Chromium-nickel base (Cr 18.0-20.0%, Ni 8.0-11.0%) + high carbon (C: 0.04-0.10%) for improved high-temperature strength;
Phosphorus and sulfur controlled (P ≤ 0.045%, S ≤ 0.030%);

Implementation Standards: ASTM A312 (American Standard), GB/T 14976 (Chinese Standard), EN 10216-5 (European Standard). 2. Core Performance Advantages
High-Temperature Performance:
Continuous operating temperature 800°C (900°C for short periods), 50°C higher than 304 stainless steel;
Excellent oxidation resistance (oxidation weight gain at 800°C <0.5 mg/cm²);
Mechanical Properties: Room-temperature tensile strength ≥515 MPa, elongation ≥40%;
Processing Characteristics: Welding requires ER308H welding wire, and post-weld solution treatment (1050-1100°C rapid cooling) is required.
3. Typical Applications
Energy and Power:
Boiler superheater tubes and heat exchanger tubes;
Nuclear power secondary circuit non-nuclear-grade piping;
Industrial Equipment:
Petrochemical cracking furnace convection section tubes;
Heat-resistant components in heat treatment furnaces. 4. Comparison with similar materials
vs S30408 ​​(304):
Higher carbon content, 20% higher high temperature strength;
Similar cost but wider applicable temperature range;
vs S32168 (321):
No titanium added, slightly weaker resistance to intergranular corrosion, but better processability.
5. Procurement and processing points
Key test: High temperature tensile test (800℃ verification);
Processing notes:
Hot forming final rolling temperature ≥900℃;
Do not mix with carbon steel tools (to prevent iron contamination);

info-400-266

Send Inquiry