Jun 10, 2025 Leave a message

Production process and technology


What are the commonly used manufacturing processes for high-quality carbon structural steel pipes?
The main processes include hot rolling, cold rolling (drawing), hot perforation method of seamless steel pipes (such as Mannesmann process) and ERW (resistance welding) of welded steel pipes. Hot rolling is suitable for large-diameter thick-walled pipes, and cold-drawn pipes have higher dimensional accuracy. Cold rolling + annealing is used in high-end fields to ensure surface finish. Process selection depends on cost and performance requirements.

What is the role of heat treatment in steel pipe production?
Annealing can eliminate cold working stress and improve machinability; normalizing refines grains and improves strength; quenching + tempering (tempering) is used for medium carbon steel such as 45# steel to enhance comprehensive properties. Heat treatment can optimize the internal structure of steel pipes (such as pearlite and ferrite ratio). For example, 20# steel is often delivered in normalized state.

How to control the dimensional accuracy of steel pipes?
The cold rolling/cold drawing process combined with die calibration can control the tolerance within ±0.05mm. Online laser diameter gauge monitors the outer diameter in real time, and inner hole honing technology ensures roundness. High-precision steel pipes require constant temperature workshops to avoid thermal expansion and contraction. API 5CT and other standards strictly stipulate the range of wall thickness deviation.

Why do high-quality carbon steel pipes need non-destructive testing?

Eddy current testing (ET) can detect surface cracks, and ultrasonic (UT) detects internal pores and inclusions. Water pressure test verifies pressure bearing capacity, and X-ray detects weld quality. Non-destructive testing is a mandatory requirement in the aviation and energy fields to avoid failure during use. Common standards include GB/T 5777.

What is the impact of continuous casting process on steel pipe quality?

Continuous casting instead of mold casting can reduce segregation and improve composition uniformity. Electromagnetic stirring technology improves the problem of looseness in the center of the ingot. The continuous casting ingot needs to be ground to remove surface defects. The sulfide inclusions of the continuous casting ingot of high-quality steel pipes must be controlled below level 1.5 (GB/T 10561).

info-252-200info-275-183info-264-191

Send Inquiry