Oct 22, 2025 Leave a message

K11578 Seamless Steel Pipe

info-259-194info-225-225

Summary / Quick Answer

K11578 is a material grade designation from the KS (Korean Industrial Standards) for a carbon steel tube used for high-temperature service. A Seamless Steel Pipe manufactured to this standard is a pipe without a welded seam, making it strong and uniform, suitable for high-pressure and high-temperature applications like boilers, heat exchangers, and superheater tubes in power plants.


Detailed Breakdown

1. K11578 - The Material Standard

KS: Stands for Korean Industrial Standards, similar to ASTM in the USA, JIS in Japan, or DIN in Germany.

K11578: This is the specific standard number. It is the Korean equivalent to other well-known international standards.

Direct Equivalent: ASTM A210 Grade A1 (USA)

Close Equivalents: JIS G3461 STBA12 (Japan), DIN 17175 St 35.8 (Germany).

Application: This standard specifies the requirements for seamless carbon steel tubes for boiler and superheater applications. This means the steel is formulated to maintain its strength and resist oxidation (scaling) at elevated temperatures.

Typical Chemical Composition of K11578:

Carbon (C): ~0.10-0.20%

Manganese (Mn): ~0.30-0.80%

Silicon (Si): ≥ 0.25%

Phosphorus (P): ≤ 0.035%

Sulfur (S): ≤ 0.035%

Typical Mechanical Properties:

Tensile Strength: ~415 MPa (min)

Yield Strength: ~255 MPa (min)

Elongation: ~30% (min)

2. Seamless Steel Pipe - The Product Type

Seamless (SMLS): This pipe is manufactured by piercing a solid billet of steel to create a hollow shell, which is then elongated and rolled to the required size and wall thickness.

Key Advantages:

No Seam: The absence of a weld seam eliminates a potential weak point, making it stronger.

Uniform Strength: Has a consistent structure around its entire circumference.

Better for Pressure: Withstands higher internal and external pressures.

Reliability: Preferred for critical applications where failure is not an option.

Common Applications

Pipes made to the K11578 standard are used in systems operating at high temperatures and pressures. Common uses include:

Boiler Tubes: The tubes inside a boiler where water is converted to steam.

Superheater Tubes: Tubes that further heat the steam to a higher temperature for improved efficiency.

Heat Exchangers: Where hot fluids transfer heat to colder fluids.

Power Generation Plants: Fossil fuel and biomass power stations.

Petrochemical Plants: In various process heating units.

Purchasing and Specification

When ordering or inquiring about "K11578 Seamless Steel Pipe," you must specify several key parameters to ensure you get the correct product:

Standard: KS K11578

Type: Seamless (SMLS)

Dimensions:

Outside Diameter (OD): e.g., 50 mm, 2 inches, 60.3 mm, etc.

Wall Thickness (WT): e.g., SCH 40, 3.5 mm, etc.

Length: Random or fixed (e.g., 6 meters, 20 feet).

Delivery Condition: Often supplied in the normalized or annealed heat-treated condition to achieve the required mechanical properties.

Certification: It is common to request a Mill Test Certificate (MTC) or Material Test Report (MTR) that certifies the chemical and mechanical properties of the pipe batch conform to the K11578 standard.

Key International Equivalents Table

Standard Body Equivalent Grade Common Name
KS (Korea) K11578 -
ASTM (USA) A210 Grade A1 Boiler Tube
JIS (Japan) G3461 STBA12 Boiler Tube
DIN (Germany) 17175 St 35.8 -
GB (China) GB 5310 20G Boiler Tube

In summary, K11578 Seamless Steel Pipe is a high-quality, seamless pipe made from a specific grade of carbon steel designed for reliable performance in high-temperature and high-pressure environments, primarily in the power and process industries.

Send Inquiry