Oct 22, 2025 Leave a message

K11562 Seamless Steel Pipe

info-225-225info-225-225

Overview

The designation K11562 is a standard from the KS (Korean Industrial Standards) for carbon and alloy steel pipes for high-temperature service. The most common material grade under this standard is STPG 38, which is roughly equivalent to ASTM A106 Grade B or ASTM A53 Grade B.

Essentially, a K11562 Seamless Steel Pipe is a high-quality, seamless pipe designed to withstand high pressure and high temperatures, making it a cornerstone material for critical industrial systems.


1. Key Specification: KS D 3562 (Replaced by KS D ISO 9329-1)

The standard "K11562" is formally known as KS D 3562: "Seamless steel pipes for pressure service at high temperatures".

Important Note: The KS standards have been harmonized with international ISO standards. KS D 3562 has been largely replaced by KS D ISO 9329-1. However, the material designation (like STPG 38) remains the same and is widely recognized in industry.

2. Common Steel Grade: STPG 38

The most frequently used grade is STPG 38.

"STP": Stands for Steel Tube for Pressure service.

"G": Indicates the use of Carbon Steel.

"38": Specifies the minimum tensile strength in kgf/mm² (approximately 380 MPa or 55,000 psi).

Chemical Composition (Typical for STPG 38):

Carbon (C): 0.30% max

Manganese (Mn): 0.29 - 1.06%

Phosphorus (P): 0.035% max

Sulfur (S): 0.035% max

Silicon (Si): 0.10 - 0.35%

Mechanical Properties (Typical for STPG 38):

Tensile Strength: 380 MPa min (55,000 psi)

Yield Strength: 205 MPa min (30,000 psi)

3. Main Characteristics and Advantages

Seamless Construction: The pipe is formed by piercing a solid billet, resulting in a continuous structure with no welds. This eliminates the potential weak point of a seam, making it stronger and more reliable.

High Strength & Durability: Excellent mechanical properties allow it to handle high internal pressures.

Good High-Temperature Performance: Designed specifically for service at elevated temperatures without significant loss of strength.

Uniform Wall Thickness: The seamless manufacturing process ensures consistent wall thickness around the entire circumference, which is crucial for pressure integrity.

Good Weldability and Formability: Can be easily welded, bent, and flanged to fit complex piping systems.

4. Common Applications

K11562 (STPG 38) seamless pipes are used in a wide range of industries where reliable, high-pressure piping is essential:

Power Generation: Boiler tubes, superheater tubes, and main steam lines in fossil fuel power plants.

Oil & Gas Refining: Process piping, refinery pipelines, and heat exchanger tubes.

Chemical & Petrochemical Plants: Transporting process fluids, catalysts, and steam under high pressure and temperature.

Industrial Boilers and Pressure Vessels: For steam and hot water distribution.

Infrastructure: For high-pressure steam and air lines.

5. Comparison: K11562 Seamless vs. Welded Pipes

Feature K11562 Seamless Pipe Welded Pipe (e.g., ERW)
Manufacturing Made from a solid billet, pierced to form a hollow tube. Made by rolling a steel plate/sketch and welding the seam.
Strength Generally higher, especially in the circumferential direction. No weld seam weakness. The Heat-Affected Zone (HAZ) of the weld can be a potential weak point.
Pressure Rating Higher pressure rating due to seamless construction. Lower pressure rating compared to a seamless pipe of the same size and grade.
Wall Thickness Can have heavier and more consistent walls. Wall thickness is often more limited and can have variations near the weld.
Cost Generally more expensive due to a more complex manufacturing process. More cost-effective for low to medium-pressure applications.
Size Range Available in a wide range, but very large diameters can be less common/more expensive. Easily produced in very large diameters.
Application Critical, high-pressure, high-temperature services. General purpose, low/medium pressure, structural applications.

Equivalent Standards in Other Countries

K11562 (STPG 38) is functionally equivalent to several major international standards:

USA (ASTM): A106 Grade B, A53 Grade B

Germany (DIN): ST 37.0 (DIN 17175)

Japan (JIS): STPG 38 (JIS G 3454) - The JIS and KS standards are very closely aligned.

International (ISO): ISO 9329-1

Summary

In short, K11562 Seamless Steel Pipe refers to a high-performance, seamless carbon steel pipe manufactured to Korean standards, with STPG 38 being the most common grade. Its primary advantages are its superior strength, pressure containment, and reliability in high-temperature environments, making it a preferred choice for critical applications in power, oil & gas, and chemical industries worldwide.

Send Inquiry