Understanding the 100x100 Square Hollow Section (SHS)
The 100mm x 100mm square steel pipe, technically known as a Square Hollow Section (SHS), is a staple of structural engineering. It provides a perfect balance of strength, torsional rigidity, and ease of joining. Accurately determining the weight of this section is critical for calculating structural loads, material costs, and shipping logistics in construction and manufacturing projects.
Theoretical Weight Calculation Formula
The weight of a square pipe can be calculated using the formula:
Weight (kg/m) = (Side - WT) * WT * 0.0314
For a 100x100mm pipe with a 5.0mm wall thickness:
(100 - 5) * 5 * 0.0314 = 14.91 kg/m.
Note: 0.0314 is the constant derived from steel density (7.85 g/cm³) adjusted for the square geometry.
Weight and Section Properties Chart (100x100mm)
| Side (mm) | Wall Thickness (mm) | Weight (kg/m) | Section Area (cm²) | Inertia Moment Ix (cm⁴) |
|---|---|---|---|---|
| 100 | 3.0 | 9.14 | 11.64 | 184.2 |
| 100 | 4.0 | 12.06 | 15.36 | 236.4 |
| 100 | 5.0 | 14.91 | 19.00 | 284.1 |
| 100 | 6.0 | 17.70 | 22.56 | 327.4 |
| 100 | 8.0 | 23.11 | 29.44 | 402.1 |
| 100 | 10.0 | 28.26 | 36.00 | 462.5 |
Material Standards and Grading
100x100 SHS is commonly manufactured to ASTM A500 Grade B or EN 10219 S355JR. Grade B (cold-formed) offers a yield strength of 46,000 psi (315 MPa), making it ideal for column supports, building frames, and industrial racking. For safety-critical structures subject to dynamic loads, specifying a normalized grade or checking the corner radius tolerance is essential.
Manufacturing Tolerances: Corner Radius
A key characteristic of square pipes is the Corner Radius (R). For cold-formed A500 tubing, the outside corner radius is typically between 1.5 to 3.0 times the wall thickness. A tighter radius allows for more precise bolting but increases the risk of stress concentration at the corners during heavy loading.
FAQs
Does the weight include the internal weld bead?
Theoretical weight calculations typically do not include the minute weight of the ERW weld bead, but standard tolerances (typically +/- 10%) account for this variance.
Can I use a 100x100 square pipe for pressurized fluid?
While they can hold pressure, SHS are structural components. For fluid transport, round pipes certified to ASTM A53 or API 5L are preferred due to their superior hoop stress distribution.
Which finish is best for outdoor 100x100 square pipe?
Hot-Dip Galvanizing is recommended. For structural SHS, ensure air-vent holes are included in the design to allow the zinc to coat the interior and prevent pressure buildup in the bath.
How do I calculate the weight in pounds per foot (lb/ft)?
Multiply the kg/m value by 0.672. For example, 14.91 kg/m is approximately 10.02 lb/ft.
What is the difference between SHS and Cold-Drawn Seamless Square tubes?
Seamless square tubes have no weld seam and offer higher structural integrity and precision, but are significantly more expensive and generally only available in smaller sizes.





