Mar 02, 2026 Leave a message

BS 4360 Grade 50 Longitudinal submerged arc welding Pipe

info-263-192info-225-225

BS 4360 Grade 50 steel is a recognized material for manufacturing Longitudinal Submerged Arc Welded (LSAW) pipes . This combination is commonly used for demanding structural applications, offshore projects, and higher-pressure fluid transportation systems.

Here is the detailed specification for a BS 4360 Grade 50 LSAW pipe.

Key Specifications

Attribute Description
Standard BS 4360: A withdrawn British Standard specification for weldable structural steels, now replaced by European standards (EN 10025).
Grade Grade 50: A higher-strength carbon-manganese steel within the BS 4360 standard, available in sub-grades like 50A, 50B, 50C, and 50D based on impact test requirements .
Process LSAW (Longitudinal Submerged Arc Welding) : Pipes are manufactured by forming steel plates into a cylinder (using JCOE or UOE technology) and welding the longitudinal seam both internally and externally using a submerged arc process .
Chemical Composition (Grade 50D, max %)  
  Carbon (C): 0.20
  Manganese (Mn): 1.50
  Phosphorus (P): 0.040
  Sulfur (S): 0.040
  Silicon (Si): 0.50
  Niobium (Nb): 0.003-0.100
  Vanadium (V): 0.003-0.150
Mechanical Properties (Typical)  
  Yield Strength: 355 MPa (51 ksi) minimum (for thicknesses ≤16mm)
  Tensile Strength: 490-630 MPa (71-91 ksi) range
  Elongation: Varies by thickness; typically 20-22%
Typical Size Range  
  Outside Diameter: 406 mm to 1820 mm (16" to 72")
  Wall Thickness: 6.0 mm to 60 mm (up to 40 mm for oil/gas, up to 60 mm for piling)
  Length: 6 m to 12.3 m (up to 75 m available for specific applications)
Manufacturing Steps 1. Steel plate selection and edge milling.
2. Edge crimping.
3. Forming using JCOE or UOE processes.
4. Internal and external submerged arc welding.
5. Mechanical expanding.
6. Non-destructive testing (Ultrasonic, X-ray).
7. Hydrostatic testing.
8. End facing and beveling.
Common Applications Offshore platforms; marine structures; high-load piling foundations; bridge construction; high-pressure water, gas, and oil transmission; engineering structures requiring higher strength.

Understanding BS 4360 Grade 50

BS 4360 was a comprehensive British standard for structural steels. Within it, Grade 50 refers to a higher-strength steel with a minimum yield strength of 355 MPa (for thicknesses up to 16mm) . This makes it the direct historical equivalent to modern EN 10025 S355 steel.

The letter suffix indicates the required level of impact toughness:

Grade 50A: No specified impact requirements.

Grade 50B: Specified impact energy at room temperature (20°C).

Grade 50C: Specified impact energy at 0°C.

Grade 50D: Specified impact energy at -20°C .

Advantages of Grade 50 LSAW Pipe

Advantage Description
Higher Strength Minimum yield strength of 355 MPa – significantly stronger than Grade 43 (275 MPa), allowing for thinner walls or higher load capacity .
Excellent Toughness Grade 50D offers guaranteed impact properties down to -20°C, suitable for offshore and demanding environments .
Large Diameter Capability LSAW process enables production of large-diameter pipes (up to 72"+) ideal for major infrastructure projects .
Thick Walls Suitable for high-load applications requiring substantial wall thickness (up to 60 mm) .
Good Weldability Controlled chemistry ensures good field weldability .

Status of the Standard

It is important to note that BS 4360 has been withdrawn and replaced by European standards, primarily EN 10025 for hot-rolled structural steel. The modern equivalent of BS 4360 Grade 50 is EN 10025 S355 . For new projects or those requiring current standards, S355 steel (often in LSAW pipes to standards like EN 10219) is typically specified. However, BS 4360 Grade 50 is still encountered in legacy projects, maintenance work, or in specifications from manufacturers who continue to list it for market familiarity .

Send Inquiry