Mar 02, 2026 Leave a message

BS 4360 Grade 43 Longitudinal submerged arc welding Pipe

info-225-225info-225-225

BS 4360 Grade 43 steel is a recognized material for manufacturing Longitudinal Submerged Arc Welded (LSAW) pipes . This combination was commonly used for general structural and fluid transportation applications, particularly in regions or projects following British Standards.

Here is the detailed specification for a BS 4360 Grade 43 LSAW pipe.

Key Specifications

Attribute Description
Standard BS 4360: A now-withdrawn British Standard specification for weldable structural steels . It has been superseded by European standards (EN 10025).
Grade Grade 43: A common carbon steel grade within the BS 4360 standard, further divided into sub-grades like 43A, 43B, 43C, and 43D based on impact test requirements .
Process LSAW (Longitudinal Submerged Arc Welding) : Pipes are manufactured by forming steel plates into a cylinder (using JCOE or UOE technology) and welding the longitudinal seam both internally and externally using a submerged arc process .
Chemical Composition (Grade 43A, max %)  
  Carbon (C): 0.25
  Manganese (Mn): 1.60
  Phosphorus (P): 0.05
  Sulfur (S): 0.06
  Silicon (Si): 0.50
Mechanical Properties (Grade 43)  
  Yield Strength: 275 MPa (40 ksi) minimum
  Tensile Strength: 430-580 MPa (63-84 ksi) range
  Elongation: Varies by thickness; typically 20-22%
Typical Size Range  
  Outside Diameter: 16" to 72" (406 mm to 1820 mm)
  Wall Thickness: 6.0 mm to 60 mm (dependent on diameter and strength grade)
Manufacturing Steps 1. Steel plate selection and edge milling.
2. Plate edge crimping.
3. Forming using JCOE or UOE processes.
4. Internal and external submerged arc welding.
5. Mechanical expanding.
6. Non-destructive testing (Ultrasonic, X-ray).
7. Hydrostatic testing.
8. End facing and beveling.
Common Applications General structural engineering; piling for foundations; water, gas, and oil transmission (low pressure); offshore projects; bridge construction.

Understanding BS 4360 Grade 43

BS 4360 was a comprehensive British standard for structural steels. Within it, Grade 43 refers to a steel with a minimum yield strength of 275 MPa (for thicknesses up to 16mm) . This makes it roughly equivalent to modern EN 10025 S275 steel.

The letter suffix indicates the required level of impact toughness:

Grade 43A: No specified impact requirements .

Grade 43B: Specified impact energy at room temperature (20°C).

Grade 43C: Specified impact energy at 0°C.

Grade 43D: Specified impact energy at -20°C .

Common Applications

BS 4360 Grade 43 LSAW pipes are used in applications where a reliable, medium-strength carbon steel pipe is required :

Structural Components: Building frames, bridge girders, and general fabrication.

Piling: Foundation piles for buildings and infrastructure (with sizes up to 63" OD) .

Fluid Transportation: Low-pressure transmission of water, gas, and oil .

Marine and Offshore: Projects requiring robust steel construction .

Status of the Standard

It is important to note that BS 4360 has been withdrawn and replaced by a series of European standards, primarily EN 10025 for hot-rolled structural steel. The modern equivalent of BS 4360 Grade 43 is generally EN 10025 S275. Therefore, for new projects or those requiring current standards, S275 steel (often in LSAW pipes to standards like EN 10219) would be specified . However, BS 4360 Grade 43 is still encountered in legacy projects, maintenance work, or in specifications from manufacturers who continue to list it for market familiarity .

 

Send Inquiry