Q1: What are the main chemical components of ordinary carbon steel pipes?
The main components of ordinary carbon steel pipes are iron (Fe) and carbon (C), and the carbon content is usually between 0.05% and 0.25%, which belongs to the category of low carbon steel. In addition, it also contains a small amount of silicon (Si), manganese (Mn), phosphorus (P) and sulfur (S) and other elements, among which silicon and manganese can improve strength and hardness, while phosphorus and sulfur as impurities need to be strictly controlled. According to GB/T 700 standard, carbon steel pipes of grades such as Q195 and Q235 are common types, and their chemical composition directly affects weldability, plasticity and mechanical properties. This type of steel pipe usually does not add alloy elements, so the cost is low and it is suitable for general industrial use.
Q2: What are the mechanical properties of ordinary carbon steel pipes?
The mechanical properties of ordinary carbon steel pipes depend on their carbon content and heat treatment status: the tensile strength is usually between 370 and 500 MPa, and the yield strength is about 235 MPa (such as Q235). The high elongation (≥20%) indicates good plasticity and formability. Impact toughness performs well at room temperature, but may decrease in low temperature environments. Its comprehensive performance can be further optimized by normalizing or annealing. These characteristics make it suitable for non-high-pressure scenarios such as structural support and fluid transportation.
Q3: What is the corrosion resistance of ordinary carbon steel pipes?
Ordinary carbon steel pipes have weak corrosion resistance and are easily corroded by oxygen, moisture and acid-base media and rust. In a humid environment, loose rust (Fe₂O₃) will form on the surface, resulting in a gradual thinning of the wall thickness. To improve corrosion resistance, protective measures such as galvanizing, painting or epoxy coating are often used. Compared with stainless steel, it is less expensive, but requires regular maintenance. Therefore, when used outdoors or in corrosive environments, anti-corrosion design must be considered.
Q4: What is the applicable temperature range of ordinary carbon steel pipes?
Ordinary carbon steel pipes have a wide applicable temperature range, generally between -20℃~400℃. In low temperature environments (such as below -20°C), toughness will be significantly reduced, and brittle fracture may occur. Specially treated low-temperature carbon steel is required. At high temperatures (over 300°C), its strength gradually decreases, and oxidation and decarburization are prone to occur. For boilers or high-temperature pipelines, heat-resistant steel containing elements such as molybdenum must be selected. Ordinary carbon steel pipes are not suitable for extreme temperature occasions, but can meet most normal temperature industrial needs.
Q5: What is the difference between ordinary carbon steel pipes and other steel pipes?
Compared with stainless steel pipes, ordinary carbon steel pipes have low cost but poor corrosion resistance; compared with alloy steel pipes, they have lower strength but better weldability. High-frequency welded carbon steel pipes have high production efficiency, while seamless carbon steel pipes have stronger pressure bearing capacity. The advantages of ordinary carbon steel pipes are high cost performance, easy processing, and suitable for large-scale applications. However, in high pressure, corrosion or extreme environments, higher-grade materials need to be selected.








