What ASTM A519 Grade 4150 Tubing Is
ASTM A519 grade 4150 is a through-hardening chromium-molybdenum alloy steel supplied as seamless mechanical tubing, registered under the UNS number G41500. It belongs to the 4100 series of chromium-molybdenum steels, in which a combination of roughly 0.5% carbon with about 1% chromium and a small molybdenum addition gives strong hardenability, good resistance to softening at temperature and a useful combination of strength and wear resistance after quenching and tempering.
Because it hardens deeply, 4150 is chosen where a component must carry high load through its full section rather than only at the surface. Tubing form is used when the finished part is a hollow shaft, a sleeve or a cylindrical body, because machining from tube removes less material than machining from bar and reduces both cutting time and scrap.
Chemical Composition
| Element | ASTM A519 grade 4150 |
| Carbon | 0.48–0.53% |
| Manganese | 0.75–1.00% |
| Silicon | 0.15–0.35% |
| Chromium | 0.80–1.10% |
| Molybdenum | 0.15–0.25% |
| Phosphorus | 0.035% max |
| Sulphur | 0.040% max |
The relatively high carbon content is what sets 4150 apart from lower-carbon chromium-molybdenum grades such as 4130. It allows higher hardness and strength to be developed after quenching, at the cost of reduced weldability and of a greater need for careful control of the quench to avoid cracking. Chromium improves hardenability and wear resistance, while molybdenum suppresses temper embrittlement and raises high-temperature strength.
Heat Treatment Practice
Tubing is normally supplied in the annealed or normalized and annealed condition so that it can be machined to shape, with the hardening operation carried out on the finished part. Typical practice is to austenitize in the 840–870 °C range, quench in oil and then temper in a range chosen to suit the duty: lower tempering temperatures give the highest strength and wear resistance, while higher temperatures are used where toughness and resistance to shock loading are more important.
Oil quenching is used because the section and the carbon level together make a water quench risky for distortion and quench cracking. Parts of complex shape or with abrupt section changes should be designed with generous radii, and distortion allowance should be planned into the machining stock. Because the alloy content is moderate, 4150 does not retain useful hardness in service above the normal tempering range of medium-carbon steels, so it is not a high-temperature alloy.
Mechanical Property Requirements and Testing
ASTM A519 states minimum tensile strength, yield strength and elongation separately for each grade and for each delivery condition, so the values that apply to a 4150 order depend on whether the tube is supplied hot finished, cold drawn or heat treated. Strength figures for a quenched and tempered part are usually agreed between buyer and supplier against the finished component rather than taken from the tube mill certificate alone. Where the application is safety related, hardness testing across the section, ultrasonic examination of the tube body and a magnetic particle check of the finished part are common additions to the order.
Typical Applications
Heavy-duty drive shafts and axle shafts in industrial and construction machinery
Columns, plungers and cylinders for hydraulic presses and forming equipment
High-strength spindles, arbors and machine tool components
Mold ejector sleeves and cores for demanding plastics tooling
Wear-resistant bushes, rolls and guides in material handling equipment
Machining and Fabrication Notes
In the annealed condition 4150 machines in a similar way to other medium-carbon alloy steels, using coated carbide inserts and moderate cutting speeds with a rigid setup. The high carbon content means the material is stronger and less forgiving than a low-carbon grade, so chatter and rubbing cuts should be avoided. Fusion welding is generally avoided on parts that will be quenched and tempered, and welding on the hardened component is not recommended; if a joint is essential, the part should be welded in the annealed condition, stress relieved and then heat treated, with a low-hydrogen consumable and a controlled preheat.
FAQ
Q: What is UNS G41500?
It is the unified numbering system identifier for the 4150 chromium-molybdenum steel chemistry that ASTM A519 lists among its standard grades. The UNS number identifies the composition, while ASTM A519 supplies the requirements for the tubular product.
Q: How does 4150 differ from 4130 tubing?
Grade 4150 contains more carbon, roughly 0.48–0.53% against about 0.28–0.33% in 4130. The higher carbon level allows higher strength and hardness after quenching and tempering, but it also reduces weldability and demands more careful quench control.
Q: What heat treatment is used for 4150 tubing?
Tubing is normally supplied annealed for machining, then the finished part is austenitized, oil quenched and tempered to the required strength and toughness. Tempering temperature is selected according to the balance of strength and impact resistance the component needs.
Q: Can 4150 tubing be welded?
It is not a welding grade. Parts that must be quenched and tempered after fabrication are welded in the annealed condition with a controlled preheat and low-hydrogen consumables, then stress relieved and heat treated. Welding on the finished hardened component is not recommended.
Q: Which applications suit grade 4150 tubing best?
Applications requiring deep hardening and high load capacity on a hollow section: heavy-duty shafts, press columns and plungers, high-strength spindles and wear-resistant sleeves and guides.
Q: How should 4150 tubing be specified on an order?
State the grade and UNS number, the delivery condition, the finished part size, the required hardness or strength range after heat treatment, and the examination requirements. Because ASTM A519 properties vary with delivery condition, the condition must always appear on the purchase order.





