Jul 30, 2025 Leave a message

ASTM A519 1015 Steel Pipe: Seamless Mechanical Tubing Guide

What Is ASTM A519 1015?

ASTM A519 is the specification for seamless carbon and alloy steel mechanical tubing, and 1015 is a low-carbon grade with approximately 0.15 percent carbon. It is the seamless counterpart of AISI 1015 steel, offering uniform properties around the tube and freedom from a weld seam.

Mechanical tubing is intended for manufactured components rather than pressure service, which is why the specification emphasizes dimensional accuracy, surface finish and machinability.

Chemical Composition

Element Requirement
Carbon 0.13-0.18%
Manganese 0.30-0.60%
Phosphorus, max 0.040%
Sulfur, max 0.050%

The low carbon content gives 1015 excellent ductility, machinability and weldability, though the grade is not intended for high-temperature or corrosive service.

Mechanical Properties

Property Typical Requirement
Tensile strength 380 MPa min
Yield strength 205 MPa min
Elongation 25% min, varies with wall
Condition Hot rolled, cold drawn or as specified

Cold-drawn 1015 tubing offers tighter tolerances and better surface finish for machined parts, while hot-rolled provides lower cost for general duty.

Applications

1015 mechanical tubing is used for shafts, connecting rods, hydraulic cylinders, conveyor rollers, bushings, spacers and low-stress automotive components. It is also a common starting stock for machining because of its predictable cutting behavior and chip formation.

Machining and Welding Guidance

The steel machines easily at moderate cutting speeds, avoiding excessive cold work hardening. Welding is straightforward with all conventional methods including arc and MIG welding, without preheat, though surfaces should be degreased to prevent porosity in the weld.

FAQ

Q1. What does A519 1015 mean?

A519 is the ASTM standard for seamless mechanical tubing and 1015 is the low-carbon grade with about 0.15 percent carbon.

Q2. What is the difference between A519 and A106?

A519 is for mechanical components with dimensional accuracy, while A106 is for high-temperature pressure piping with specified strength requirements.

Q3. Is 1015 tubing suitable for high-temperature service?

No, the low carbon content makes it unsuitable for elevated-temperature service; alloy or pressure grades should be used instead.

Q4. Can 1015 tubing be welded?

Yes, it welds readily with standard methods without preheat, making it easy to fabricate into assemblies.

Q5. What is the carbon equivalent of 1015?

It is a Chinese-grade 15 steel counterpart, with carbon content around 0.13 to 0.18 percent, giving excellent weldability.

Q6. What condition is A519 1015 supplied in?

Hot-rolled, cold-drawn, cold-drawn annealed or as specified, with cold-drawn preferred for precision machined parts.

Send Inquiry