ASTM A500 Steel Structural Tubing description
ASTM A500 structure tube refers to cold-formed welded and seamless carbon steel structural tubes used in engineering structures, complying with the standard specification ASTM A500. Here's a more detailed explanation:
Definition and Standard Compliance
It is a type of steel tube specifically designed for structural applications. The ASTM A500 standard sets the requirements for this kind of tube, including its material properties, manufacturing processes, testing methods, and dimensional tolerances.
Manufacturing Process
Cold-Forming: The tube is formed by bending steel strips or coils at room temperature into the desired shape, such as round, square, or rectangular. This process enhances the strength and dimensional accuracy of the tube.
Welded or Seamless: ASTM A500 tubes can be either welded or seamless. Welded tubes are made by joining the edges of a steel strip through welding, while seamless tubes are produced from a solid billet without any welding seams.
Material Properties
Chemical Composition: The standard specifies the maximum and minimum limits for various elements in the steel, such as carbon, manganese, phosphorus, and sulfur, to ensure the desired mechanical properties.
| Grades A, B, and D – Heat analysis | Grades A, B, and D – Product analysis | Grade C – Heat analysis | Grade C – Product analysis | |
| Carbon, maximum % | 0.26 | 0.3 | 0.23 | 0.27 |
| Manganese, maximum % | 1.35 | 1.4 | 1.35 | 1.4 |
| Phosphorous, maximum, % | 0.035 | 0.045 | 0.035 | 0.045 |
| Sulfur, maximum, % | 0.035 | 0.045 | 0.035 | 0.045 |
| Copper, minimum (if Copper-containing steel is specified in the purchase order) % | 0.2 | 0.18 | 0.2 | 0.18 |
Mechanical Properties: ASTM A500 tubes have specific requirements for yield strength, tensile strength, and elongation. These properties ensure that the tubes can withstand the loads and stresses encountered in structural applications.
| Round Structural Tubing | Grade A | Grade B | Grade C | Grade D |
| Tensile Strength, Minimum, psi [Mpa] | 45,000 [310] | 58,000 [400] | 62,000 [425] | 58,000 [400] |
| Yield Strength, Minimum, psi [Mpa] | 33,000 [230] | 42,000 [290] | 46,000 [315] | 36,000 [250] |
| Shaped Structural Tubing | Grade A | Grade B | Grade C | Grade D |
| Tensile Strength, Minimum, psi [Mpa] | 45,000 [310] | 58,000 [400] | 62,000 [425] | 58,000 [400] |
| Yield Strength, Minimum, psi [Mpa] | 39,000 [270] | 46,000 [315] | 50,000 [345] | 36,000 [250] |
Applications
Construction: Widely used in building frames, bridges, towers, and other civil engineering structures to provide support and stability.
Mechanical Engineering: Used in the manufacture of machinery frames, conveyor systems, and other mechanical structures where strength and durability are essential.
Transportation: Can be used in the construction of vehicles, such as trailers and truck bodies, to provide a strong and lightweight structure.
comparison table between ASTM A500 and ASTM A53 standards:
| Comparison Aspect | ASTM A500 | ASTM A53 |
|---|---|---|
| Standard Title | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| Primary Use/Application | Structural applications such as building frames, bridges, and other civil engineering structures; also used in mechanical engineering and transportation | Primarily for conveying gas, water, oil, and other liquids; also used in structural applications but less common than ASTM A500 for this purpose |
| Manufacturing Process | Cold-formed welded and seamless tubing | Can be produced as welded or seamless pipe; often finished with a black or galvanized coating |
| Shape Availability | Available in round, square, rectangular, and special shapes | Primarily round; can be found in other shapes but less commonly |
| Material Properties | Specifies requirements for yield strength, tensile strength, and elongation; has specific chemical composition limits | Specifies requirements for tensile strength, yield strength, and elongation; also includes chemical composition requirements; often has a specified coating (zinc) for corrosion resistance |
| Size Range | Wide range of sizes available, from small diameters to large structural sections | Standard sizes available, typically ranging from small diameters for water pipes to larger diameters for industrial applications |
| End Use Flexibility | Highly flexible for various structural designs due to multiple shapes and sizes | Primarily designed for conveying fluids; can be used structurally but with limitations compared to ASTM A500 |
| Corrosion Resistance | Typically not coated unless specified; relies on the inherent properties of the steel or additional coatings applied by the user | Often hot-dip galvanized for corrosion protection; black pipe is uncoated and may require additional protection |
Test and inspection

Packaging and shipping






