Nov 27, 2025 Leave a message

1.0565 Carbon Steel Boiler steel pipe

info-225-225info-275-183

Overview

The designation 1.0565 is a standard EN (European Norm) material number. It falls under a category of carbon-manganese steels specifically designed for use at elevated temperatures, making it a classic choice for boiler tubes and seamless pressure pipes.

The most common corresponding steel grade for this number is P265GH according to the EN 10216 standard.


1. Key Specifications and Equivalent Standards

EN Number: 1.0565

EN Steel Grade: P265GH

P = Pressure purpose

265 = Minimum yield strength (in MPa) at room temperature

G = Manganese (Mn) alloyed

H = Suitable for high-temperature service

Main Standard: EN 10216-2: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties.

Common Equivalent Standards:

ASTM A192 / A213 T11? - Not a direct equivalent. P265GH is a non-alloy steel, while common ASTM boiler tubes like T11 are chromium-molybdenum alloys. A closer ASTM equivalent for general boiler applications might be ASTM A210 A1, but the chemical and mechanical properties are not identical. P265GH is primarily an EN-specific grade.


2. Chemical Composition (Typical according to EN 10216-2)

The composition is balanced to provide good weldability and strength at high temperatures.

Element Composition (%)
Carbon (C) max. 0.20
Silicon (Si) max. 0.40
Manganese (Mn) max. 1.10
Phosphorus (P) max. 0.025
Sulfur (S) max. 0.015
Chromium (Cr) max. 0.30
Copper (Cu) max. 0.30
Molybdenum (Mo) max. 0.08
Nickel (Ni) max. 0.30
Aluminum (Al) min. 0.020

Note: The low carbon and sulphur/phosphorus content ensures good weldability and toughness.


3. Mechanical Properties

The "H" in P265GH means its mechanical properties are guaranteed at elevated temperatures.

At Room Temperature:

Yield Strength (Rp0.2): min. 265 MPa

Tensile Strength (Rm): 410 - 530 MPa

Elongation (A): min. 24% (varies with tube dimensions)

At Elevated Temperature:
A key feature of this steel is its defined minimum yield strength at high temperatures. For example:

At 300°C: Min. Yield Strength is ~186 MPa

At 350°C: Min. Yield Strength is ~167 MPa

At 400°C: Min. Yield Strength is ~150 MPa

This data is crucial for engineers designing boilers and pressure vessels to ensure safety under operating conditions.


4. Key Characteristics and Advantages

High-Temperature Strength: Its primary advantage is maintaining structural integrity and pressure-bearing capacity at sustained high temperatures (typically up to ~450-500°C).

Good Weldability: The low carbon equivalent allows it to be welded easily using common methods without pre-heating or post-weld heat treatment in most cases (though specific codes and wall thicknesses must be followed).

Good Formability: It can be bent and flanged with relative ease, which is essential for constructing complex boiler systems.

Cost-Effective: As a non-alloy carbon steel, it is more economical than alloy steels like T11, T22, or P91, making it ideal for less severe service conditions.

Excellent Thermal Conductivity: Carbon steel has good heat transfer properties, which is vital for efficient boiler operation.


5. Common Applications

P265GH (1.0565) tubes are used wherever there is a need for seamless pipes that can withstand internal pressure and high heat. Typical applications include:

Water Tube Boilers: For both the generating and superheater tubes.

Fire Tube Boilers: The smoke tubes.

Heat Exchangers and Condensers

Superheated Steam Pipes

High-Temperature Pressure Vessels

Piping Systems for Hot Water and Saturated Steam


6. Important Considerations for Use

Corrosion Resistance: This is a carbon steel and has limited corrosion resistance. It is susceptible to rust and oxidation. In boiler applications, the water chemistry must be carefully controlled to prevent internal corrosion.

Temperature Limit: While good for elevated temperatures, it is not suitable for very high-temperature or high-pressure applications where creep strength becomes critical. For more demanding conditions, low-alloy steels (e.g., 1.7335 / 13CrMo4-5) or stainless steels are used.

Compliance: Always ensure the material is supplied with the proper certification (e.g., 3.1B or 3.2 according to EN 10204) to guarantee it meets the requirements of EN 10216-2.

Summary

1.0565 Carbon Steel Boiler Pipe (P265GH) is a reliable, cost-effective, and widely used material for constructing pressure parts in boilers and heat exchangers operating at medium temperatures. Its excellent combination of weldability, high-temperature strength, and formability makes it a fundamental building block in the thermal power and process industries.

When sourcing this material, always specify the complete standard, for example: Seamless Steel Tube EN 10216-2 / 1.0565 / P265GH.

Send Inquiry