### 1. What is the difference between A36 and Q235 steel?
A36 (USA/ASTM standard) and Q235 (China/GB standard) are both carbon structural steels with very similar mechanical properties and are often considered general-purpose equivalents.
The main differences are:
* **Standards and Chemical Composition:** A36 has a specified maximum carbon content but also has a specified minimum for copper (0.20% min) for atmospheric corrosion resistance. Q235's chemical requirements are based on its grade (A, B, C, D), which primarily differ in impact toughness at different temperatures. The deoxidization method (which affects weldability and soundness) is also specified in Q235 grades (e.g., F for rimmed steel, Z for killed steel).
* **Yield Strength:** For shapes and sections, A36 has a specified yield strength of 36 ksi (≈250 MPa). For plates, the yield strength is 36 ksi for plates up to 8 inches thick, but it can be as low as 32 ksi (≈220 MPa) for thicker plates. Q235 has a defined yield strength of 235 MPa (≈34 ksi) for sections, plates, and bars up to 16mm thick. For thicker materials, the yield strength requirement decreases.
* **Testing:** A36 typically uses the tensile test as the primary acceptance test. For Q235, the bend test is a more common acceptance test.
In summary, while their strength levels are very close for common thicknesses, the key differences lie in the specific chemical composition requirements and the standard systems they belong to.
### 2. How thick is Q235 steel?
Q235 steel is not a single thickness. It is a material grade that is produced in a very wide range of thicknesses and forms to meet different application needs. You can find Q235 steel in:
* **Plates/Sheets:** From very thin sheets (e.g., 1 mm or 0.04 inches) to very thick plates (over 200 mm or 8 inches).
* **Sections:** Such as angles, channels, I-beams, and rebar, which have their own specific dimensional standards.
* **Bars:** Round bars, square bars, and flat bars in various diameters and thicknesses.
Therefore, the thickness depends entirely on the product form and the manufacturer's capabilities. You must specify the desired thickness when ordering Q235 steel.
### 3. What is the difference between Q235 and Q345B?
Q235 and Q345B are both Chinese structural steels, but Q345B is a higher-strength grade.
* **Strength:** This is the primary difference. The "235" in Q235 indicates a **yield strength of 235 MPa**. The "345" in Q345B indicates a **yield strength of 345 MPa**. This makes Q345B about 47% stronger than Q235.
* **Chemical Composition & Quality:** Q345 is a High-Strength Low-Alloy (HSLA) steel. It contains additional alloying elements like manganese (Mn) in higher quantities, and may also contain vanadium (V), niobium (Nb), and titanium (Ti) to achieve its higher strength. The "B" in Q345B denotes a specific quality grade that guarantees impact toughness at 20°C.
* **Applications:** Due to its higher strength, Q345B allows for the design of lighter and stronger structures. It is commonly used in more demanding applications like bridges, heavy-duty buildings, ships, and pressure vessels, whereas Q235 is used for general construction, frames, and less critical parts.
### 4. What is material code Q235?
The material code "Q235" is a designation from the Chinese Standard GB/T 700.
* **Q:** Stands for "Qu" , which is the Chinese character for Yield Point (Yield Strength).
* **235:** Represents the **minimum yield strength** of the material, which is **235 Megapascals (MPa)**.
So, Q235 literally means "steel with a yield strength of 235 MPa." It is a general-purpose carbon structural steel, similar to ASTM A36 in the USA or S235JR in Europe.
### 5. What is the difference between Q235 and 20?
Q235 and "20" steel (or 20# steel) are fundamentally different in their classification and primary use.
* **Q235** is a **carbon structural steel**. Its most important properties are its **mechanical properties** (yield strength, tensile strength). Its chemical composition is controlled to a lesser degree to achieve these mechanical properties cost-effectively. It is used for building frames, construction, and general structural applications.
* **20# Steel** is a **carbon quality steel** or **carbon steel for mechanical structures**. Its most important characteristic is its precise **chemical composition**. The "20" indicates an average **carbon content of 0.20%**. It is designed for parts that will be heat-treated (like carburizing or quenching) or machined. It is used for making mechanical components like gears, shafts, and connecting rods where precise control over hardness and strength after heat treatment is critical.
In short: **Q235 is for structures (like building frames), while 20# steel is for mechanical parts (like gears and shafts).**





