

Overview
1.8935 is a European standard (EN) designation for a fine-grained, thermo-mechanically rolled carbon-manganese steel specifically designed for pressure purposes and elevated temperature applications. It is a very common and versatile material for boiler pipes and pressure vessels.
The most common name you will encounter for this grade is P265GH, according to the EN 10216-2 standard for seamless tubes for pressure purposes.
Key Specifications and Equivalent Standards
| Standard | Grade | Note |
|---|---|---|
| EN 10216-2 | P265GH | This is the primary and most specific specification for seamless boiler pipes. |
| EN 10028-2 | P265GH | This is the specification for flat products (plates) used to make welded pipes. |
| DIN 17175 | St35.8 / St45.8 | Older German standards; P265GH is a modern equivalent with more stringent requirements. |
| ISO 9327-2 | P265GH | International equivalent. |
| ASTM A192 / A210 | Grade A1 | The closest American equivalents, though chemical and mechanical properties are not identical. |
Chemical Composition (according to EN 10216-2)
The composition is carefully controlled to ensure good weldability and strength at high temperatures.
| Element | Composition (%) |
|---|---|
| Carbon (C) | ≤ 0.20 |
| Silicon (Si) | ≤ 0.40 |
| Manganese (Mn) | ≤ 1.40 |
| Phosphorus (P) | ≤ 0.025 |
| Sulfur (S) | ≤ 0.015 |
| Aluminum (Al) | ≥ 0.020 |
Key Points:
Low Carbon & Sulfur: This ensures excellent weldability and good toughness.
Fine Grain Structure: The minimum Aluminum content acts as a grain refiner, ensuring a fine-grained microstructure which improves toughness and strength.
Manganese Content: Manganese contributes to strength and hardenability.
Mechanical Properties (at room temperature)
These properties are for the finished pipe, tested transversely on a strip taken from the pipe.
| Property | Value |
|---|---|
| Yield Strength (Rp0.2 Min) | 265 MPa |
| Tensile Strength (Rm) | 410 - 530 MPa |
| Elongation (A Min) | 24% (on base material) |
Why "P265GH"? The "P" stands for Pressure, "265" is the minimum yield strength in MPa at room temperature, and "GH" stands for Gaseous and High temperature.
High-Temperature Properties (Key Feature)
This is the most critical characteristic of 1.8935/P265GH. It is designed to retain its strength when exposed to high temperatures for long periods (creep strength).
| Temperature | Approx. 0.2% Proof Strength (Rp0.2 Min) |
|---|---|
| 50°C | 255 MPa |
| 100°C | 240 MPa |
| 200°C | 215 MPa |
| 250°C | 195 MPa |
| 300°C | 175 MPa |
| 350°C | 155 MPa |
As you can see, it maintains significant strength well above 300°C, which is crucial for boiler operation.
Main Applications
1.8935/P265GH pipes are used wherever there is high pressure and temperature:
Boiler Tubes: The primary application. Used in both water-tube and fire-tube boilers for:
Superheaters
Reheaters
Economizers
Water wall panels
Pressure Vessels: For containing steam, hot water, and other process fluids.
Heat Exchangers & Condensers: Tubes that carry heating or cooling media.
Superheated Steam Piping: For transporting steam from the boiler to turbines or process equipment.
Power Generation Plants: Fossil fuel and biomass power stations.
Why is it Suitable for Boilers?
High-Temperature Strength: Its primary advantage is its ability to withstand internal pressure at operating temperatures typically between 250°C and 400°C without significant creep deformation.
Good Weldability: The low carbon equivalent allows for easy and safe welding without pre- or post-heat treatment in most thicknesses, which is essential for fabricating boiler systems.
Good Formability: It can be bent and formed into the required shapes for complex boiler designs.
Cost-Effectiveness: As a carbon steel, it is more economical than alloy steels like 1.7380 (P11) or stainless steels, while providing adequate performance for many boiler sections.
Manufacturing and Supply
Process: Typically supplied as seamless (S) or welded (W) pipes.
Heat Treatment: Pipes are typically supplied in the normalized (+N) condition, which optimizes the grain structure and mechanical properties.
Summary
1.8935 (P265GH) Carbon Steel Boiler Pipe is a high-quality, standardized material that is the workhorse of the boiler and pressure vessel industry. Its balanced combination of strength at elevated temperatures, excellent weldability, and good toughness makes it a reliable and cost-effective choice for critical high-pressure, high-temperature applications. When sourcing this material, always ensure the mill certificates and markings comply with EN 10216-2.





