

Overview
1.5415 is a European standard (EN) designation for a fine-grained, low-carbon manganese-molybdenum steel. It is a classic and widely used material for pressure vessel and boiler applications. The "Pipe" form indicates it is manufactured as seamless or welded tubes specifically for these high-pressure, high-temperature duties.
The equivalent and more commonly recognized material standard is EN 10216-2, which specifies the technical delivery conditions for seamless steel tubes for pressure purposes.
Key Material Specifications
EN Designation: 1.5415
Material Number: 1.5415
Old Designation: 15Mo3
Common Standard: EN 10216-2 / P235GH (This is the most frequent specification for boiler tubes made from this steel).
*Note: While 1.5415/15Mo3 is the base material, P235GH is a very similar grade often supplied under the same standard. They are largely interchangeable for many boiler applications, with slight variations in chemical composition and mechanical properties.*
U.S. Equivalent (Similar): ASTM A335 Grade P1 or ASTM A209 Grade T1. These are not exact equivalents but share similar applications (Mo steel for high-temperature service).
Chemical Composition (Typical %)
The composition is designed for good weldability and high-temperature strength.
| Element | Content (%) |
|---|---|
| Carbon (C) | ≤ 0.18 |
| Manganese (Mn) | 0.40 - 0.90 |
| Silicon (Si) | ≤ 0.35 |
| Phosphorus (P) | ≤ 0.025 |
| Sulphur (S) | ≤ 0.015 |
| Molybdenum (Mo) | 0.25 - 0.35 |
The low carbon and sulphur/phosphorus content ensure excellent weldability. The addition of Molybdenum is the key feature, providing increased strength at elevated temperatures.
Mechanical Properties (at room temperature)
Properties are typically specified for tubes delivered in the normalized condition.
| Property | Value |
|---|---|
| Yield Strength (Rp0.2), Min | 235 MPa |
| Tensile Strength (Rm) | 360 - 480 MPa |
| Elongation (A), Min | ~25% (varies with thickness) |
Why is it Used for Boiler Pipes?
This steel is specifically engineered to perform reliably in the demanding environment of boilers and pressure vessels:
Good Elevated Temperature Strength: The addition of Molybdenum (Mo) significantly improves the steel's creep resistance. Creep is the slow, permanent deformation that can occur under stress at high temperatures. This property is critical for boiler tubes that operate for years under high pressure and temperatures (typically up to ~500°C / 932°F).
Excellent Weldability: The low carbon content (max 0.18%) makes it very easy to weld without pre-heating or post-weld heat treatment in most thicknesses, which is essential for fabricating large boiler structures.
Good Toughness and Ductility: It can withstand the internal pressures and thermal cycles (heating and cooling) without becoming brittle.
Good Oxidation Resistance: It forms a stable oxide layer that protects it from further scaling at moderate operating temperatures.
Typical Applications
1.5415 boiler pipes are found in:
Power Generation Boilers: Water wall tubes, superheater tubes (lower temperature sections), economizers, and boiler headers.
Industrial Boilers: Tubes and pipes in various process heating boilers.
Heat Exchangers: For shells and tubes where operating conditions are within its temperature range.
Pressure Vessels: For containing gases or liquids at high pressures.
Piping Systems: For high-temperature and high-pressure steam and water lines.
Comparison with Other Common Boiler Steels
| Steel Grade | Key Feature | Typical Use Case |
|---|---|---|
| 1.5415 (15Mo3) | Molybdenum-added for medium-temperature strength and creep resistance. | Boiler tubes, headers, and pressure vessels operating up to ~500°C. |
| P235GH (1.0345) | Plain Carbon-Manganese steel. Good general-purpose boiler steel. | Lower-temperature boiler sections, pressure vessels, and general structural parts where high creep resistance is not critical. |
| 13CrMo4-5 (1.7335) | Chromium-Molybdenum steel. Higher strength and temperature resistance. | Superheaters and reheaters operating at higher temperatures and pressures than 1.5415 can handle. |
| ASTM A106 Gr. B | U.S. Standard carbon steel pipe for high-temperature service. | A very common general-purpose pipe for high-temp service, often used interchangeably with P235GH for less critical duties. |
Summary
1.5415 Carbon Steel Boiler Pipe is a reliable, well-established, and cost-effective material specifically designed for pressurized components in boilers and pressure vessels. Its key advantage is the molybdenum addition, which provides the necessary strength and creep resistance for continuous operation at elevated temperatures, making it a fundamental building block in thermal power plants and industrial heating systems.
When sourcing this material, you will most commonly encounter it specified under the standard EN 10216-2.





