Q235B SSAW Pipe
video

Q235B SSAW Pipe

Standard: API ASTM BS DIN GB JIS
Surface: Bitumen, galvanized, 3PE, FBE
Length: 6-12m
Send Inquiry
Chat Now
Product Introduction

Q235B SSAW Pipe Description

Q235B spiral welded pipe is a type of carbon structural steel pipe with a yield strength (σs) of 235 MPa. It is produced by coiling low-carbon carbon structural steel strips at a certain spiral angle (called forming angle) to form pipe blanks, and then welding the pipe seams together. Q235B spiral welded pipe is a common and popular type of welded pipe.

Q235B SSAW Welded Pipe Specification

OD 508-3660MM (8" -144")
WT 5-30mm
Length 2-30m
Certificate ISO9001
Usage For liquid transportation: water supply, drain off water, petroleum transportation, etc.
For gas transmission: coal gas, steam, liquefied petroleum gas, gas, etc.
For structure: piling, bridge, wharf, road, architectural structure, etc

Q235B Spiral Submerged Arc Welded Pipe

Q235B welded pipeQ235B carbon welded pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GNEE Q235B Welded Pipe Welding Requirements and Process Parameters

Weld Seam Height less than 1.6 mm, locally not exceeding 2.5 mm, and with a length no greater than 50 mm; interlayer temperature not lower than 100°C. In case of excessive interlayer temperature, it should be allowed to naturally cool to the specified temperature. Root welding environment wind speed less than 2.0 m/s, filling and capping welding environment wind speed less than 5 m/s, ambient temperature 28-29°C, air relative humidity 65%-70%.

Before welding, the area to be welded should be cleaned thoroughly to ensure that there is no oil, rust, oxide layer, or other contaminants. The length of spot welding should be controlled within the range of 10-20 mm.

Welding parameters include welding groove arrangement, welding material model specifications, current polarity, welding current, arc voltage, wire feeding speed, welding speed, and heat input according to the pWPS.

After the test plate welding is completed, visual and non-destructive testing should be carried out according to the standards to meet the requirements of NB/T 47014 and other corresponding industry standards.

Mechanical properties include tensile, low-temperature impact, hardness, and bending tests. The test results should meet the requirements of the evaluation standards or product acceptance specifications, and the range of macroscopic defect inspection should comply with the range specified in the evaluation standards.

Hot Tags: q235b ssaw pipe, China q235b ssaw pipe manufacturers, suppliers, SSAW Steel Pipe, round welded steel pipe, JIS A5525 SSAW Pipe, EN10217 P195 P235 P265 Spiral Welded Pipe, SSAW Carbon Steel Tube, SY T 5037 2000 SSAW Pipe

Send Inquiry