Lap Joint Stub End

Lap Joint Stub End

Lap joint stub end is generally matched with flange and benefit the flange to align bolt holes smoothly. There are two types that long pattern and short pattern. Buttwelding Fittings are used in a piping system to change direction or function of media, to branch off, reduce pipe size or attach...
Send Inquiry
Chat Now
Product Introduction

Lap joint stub end is generally matched with flange and benefit the flange to align bolt holes smoothly. There are two types that long pattern and short pattern.

 

Buttwelding Fittings are used in a piping system to change direction or function of media, to branch off, reduce pipe size or attach auxiliary equipment. They are availbale in multiple types as elbow, tee, cap, reducer, stub end and oelt, that produced in cold and hot forming based on ASTM A403 and ASTM A234 specification.

 

ASTM A403 Specificaiton

 

This specification covers wrought stainles steel fittings for pressure piping applications. They are designed in WP or CR based on ASME or MSS standard dimensions. You need to indicate seamless or welded type while purchasing WP grades fittings.

 

ASTM A234 Specification

 

This specifiation covers wrought carbon steel and alloy steel fittings of semaless and welded construction by the standard of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95 and MSS -SP-97. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures.

 

Lap Joint Stub End Type & Material

 

Type Long Pattern (LP) and Short Pattern (SP)
Size Range 1/2" - 24" / DN15 - 600
Thickness Schedule SCH 10 - SCH 160, XXS
China Standard GB/T12459, GB/T13401, HG/T21635/21631, SH3408/3409
America Standard ANSI / ASME B16.9 / MSS SP 43
Japan Standard JIS B2311/2312/2313
Germany Standard DIN2605/2615/2616/2617
Europe Standard EN10253
Carbon Steel Q235, 20#, 35#, 45#, 20G,ASTM A234 WPB/WPC
Low Temp Carbon Steel Q345B, 16Mn, ASTM A420 WPL6
Pipeline Steel ASTM A860 WPHY 42 / 46 / 56 / 60 / 65
Alloy Steel

ASTM A234 WP11 / WP12 / WP 5 / WP9 / WP91 / WP92,

15CrMoG, 12Cr1MoVG, 12Cr5Mo, 1Cr5Mo, Cr9Mo, 10CrMo910, 12CrMo4-5

Stainless Steel ASTM A403 WP304/304L/304H, 316/316L, 310S, 317,347,904L
Duplex Stainless Steel ASTM A815 S32205, S31803, 32750, 32760

 

Lap Joint Stub End Dimensions & Weight

DN NPS OD F R G SCH40 WEIGHT
Max. Min. Long Type Short Type A Bmax LP (kg) SP (kg)
15 1/2 22.8 20.5 76 51 3 0.8 35 0.12 0.09
20 3/4 28.1 25.9 76 51 3 0.8 43 0.16 0.12
25 1 35.0 32.6 102 51 3 0.8 51 0.32 0.18
32 11/4 43.6 41.4 102 51 5 0.8 64 0.43 0.25
40 11/2 49.9 47.5 102 51 6 0.8 73 0.52 0.31
50 2 62.4 59.5 152 64 8 0.8 92 1.02 0.52
65 21/2 75.3 72.2 152 64 8 0.8 105 1.60 0.81
80 3 91.3 88.1 152 64 10 0.8 127 2.11 1.10
90 31/2 104.0 100.8 152 76 10 0.8 140 2.55 1.52
100 4 116.7 113.5 152 76 11 0.8 157 3.05 1.80
125 5 144.3 140.5 203 76 11 1.6 186 5.42 2.25
150 6 171.3 167.5 203 89 13 1.6 216 7.02 3.59
200 8 222.1 218.3 203 102 13 1.6 270 10.6 5.98
250 10 277.2 272.3 254 127 13 1.6 324 18.4 10.2
300 12 328.0 323.1 254 152 13 1.6 381 22.8 14.9
350 14 359.9 354.8 305 152 13 1.6 413 28.7 15.8
400 16 411.0 405.6 305 152 13 1.6 470 33.1 18.9
450 18 462.0 456.0 305 152 13 1.6 533 38.0 22.0
500 20 514.0 507.0 305 152 13 1.6 584 42.3 24.3
550 22 565.0 558.0 305 152 13 1.6 641 - -
600 24 616.0 609.0 305 152 13 1.6 692 51.2 29.6

Notes:

1) When the short type is used on the larger flanges with PN50 and PN110(300 and 600LB)and on flanges with PN150(900LB) and above, or the long type is used on the larger flange with PN260 and PN420(1500 and 2500LB),the length of the cylinder may be added to be feasible the welding,the adding length shall be negotiated by manufacturer and purchaser.

2) The thickness of joint shall be added if the TG and MFM contact surface of flange are used, and the adding thickness shall increase (not be included in) the base length F.

3) The radius of fillet R (type A) shall conform to the ones of loose flanges according to GB/T9118.1~9118.2 or ASME B16.5. The radius of fillet R (type B) is only applied for the standards of MSS SP-43 with short length F.

4) The lap joint diameter G shall conform to the standard machined face indicated in ASME b16.5, and the back of joint shall be machined to conform to the surface of installation.When RJ used, the size K specified in ASME B16.5 shall apply.

5) The minimum lap joint thickness t shall not be less than nominal pipe wall thickness.

Hot Tags: lap joint stub end, China lap joint stub end manufacturers, suppliers, welded pipe fitting, pipe fitting for laboratory, cj standard pipe fitting, chlorinated polyvinyl chloride pipe fitting, polyetherimide pipe fitting, food grade pipe fitting

Send Inquiry