JIS G3452 Carbon Steel Pipe

JIS G 3452 is used for pipelines with relatively low working pressure, such as steam, water (except water supply), oil, gas, air, etc.

Letter Symbol of Grade

World standard comparative table

JIS G3452 SGP Pipe Dimension:

Nominal diameter		Outside diameter (mm)	Tolerances on the outside diameter		Wall thickness	Tolerances on wall thickness	Unit mass excluding socket
A	B	Outside diameter (mm)	Pipes to be cut in taper thread	Other pipes	mm	Tolerances on wall thickness	kg/m
6	1/8	10.5	±0.5mm	±0.5mm	2	+ Not specified -12.5%	0.419
8	1/4	13.8	±0.5mm	±0.5mm	2.3		0.664
10	3/8	17.3	±0.5mm	±0.5mm	2.3		0.866
15	1/2	21.7	±0.5mm	±0.5mm	2.8		1.25
20	3/4	27.2	±0.5mm	±0.5mm	2.8		1.6
25	1	34	±0.5mm	±0.5mm	3.2		2.45
32	1 1/4	42.7	±0.5mm	±0.5mm	3.5		3.16
40	1 1/2	48.6	±0.5mm	±0.5mm	3.5		3.63
50	2	60.5	±0.5mm	±1%	3.8		5.12
65	2 1/2	76.3	±0.7mm	±1%	4.2		6.34
80	3	89.1	±0.8mm	±1%	4.2		8.49
90	3 1/2	101.6	±0.8mm	±1%	4.2		9.74
100	4	114.3	±0.8mm	±1%	4.5		12.2
125	5	139.8	±0.8mm	±1%	4.5		16.1
150	6	165.2	±0.8mm	±1%	5		19.2
175	7	190.7	±0.9mm	±1%	5.3		24.2
200	8	216.3	±1.0mm	±1%	5.8		30.4
225	9	241.8	±1.2mm	±1%	6.2		36
250	10	267.4	±1.3mm	±1%	6.6		41.2
300	12	318.5	±1.5mm	±1%	6.9		53.8
350	14	355.6	-	±1%	7.9		65.2
400	16	406.4	-	±1%	7.9		77.6
450	18	457.2	-	±1%	7.9		87.5
500	20	508	-	±1%	7.9		97.4

GNEE Supply JIS G3452 Carbon steel pipes for ordinary piping

JIS CARBON STEEL PIPES JIS G3452 PIPE

Send Inquiry