Mar 18, 2024 Leave a message

DIN ST37 Steel Pipe Performance

ST37-2 is a German carbon structural steel grade.
Class: Foreign standard non-heat-treated steel (carbon steel, low alloy steel) grades.
Uses: These steels are engineering steels, some of them are used as structural steels, and they are usually delivered without heat treatment. Can be made into bars (bar, coil, I-beam, channel, angle), steel strip (plate) and steel pipe (mainly welded steel pipe). Among them, it is used as more steel in engineering, and a considerable part of it is used as mechanical or machine components and so on.
This material corresponds to the Chinese equivalent of carbon structural steel Q235B (the old grade was: A3-B).

ST37 structural pipe
In addition: Since this steel is similar to the Chinese high quality carbon structural steel 20 steel, it is also used in place of 20 steel.
High-quality carbon structural steel and ordinary carbon structural steel compared to sulfur, phosphorus and other non-metallic inclusions in the content is lower. According to the different carbon content and use, this type of steel is broadly divided into three categories.
1, less than 0.25% C for low carbon steel, especially with a carbon content of less than 0.10% of the 08F, 08Al, etc., due to a very good deep-drawn and weldability is widely used as a deep-drawn parts such as automobiles, cans, ...... 20G is the main material for the manufacture of ordinary boilers. In addition, low carbon steel is also widely used as carburised steel, used in machinery manufacturing.
2, 0.25 ~ 0.60% C for the medium carbon steel, more in the tempered state, the production of machinery manufacturing industry parts. Tempered more or less 22 ~ 34HRC, can get comprehensive mechanical properties, but also easy to cut.

DIN ST37.2 seamless structural pipe
3, more than 0.6% C for high carbon steel, more used in the manufacture of springs, gears, rollers, etc., according to the different amount of manganese, can be divided into ordinary manganese content (0.25 ~ 0.8%) and higher manganese content (0.7 ~ 1.0% and 0.9 ~ 1.2%) two groups of steel. Manganese can improve the hardenability of steel, strengthen the ferrite, improve the yield strength of steel, tensile strength and wear resistance. Usually high in manganese-containing steel grades after the additional mark "Mn", such as 15Mn ﹑ 20Mn in order to distinguish from the normal amount of manganese content of carbon steel.
Carbon tool steel carbon content of 0.65 ~ 1.35%, after heat treatment can get high hardness and high wear resistance, mainly used in the manufacture of a variety of tools, cutting edge, moulds and gauges (see tool steel).
 

Send Inquiry