Oct 21, 2025 Leave a message

Yield Strength of Q195 Steel

### 1. Yield Strength of Q195 Steel

The **yield strength of Q195 steel is 195 MPa**. This value is determined from a test on a 16mm steel bar. For steel bars with diameters between 16mm and 40mm, the yield strength is 185 MPa.

### 2. Three Grades of Steel Pipe

Different standards define various grades. For instance, the **ASTM A252 specification for steel pipe piles includes three grades**:

- **Grade 1**: Yield Strength ≥ 205 MPa (30,000 psi)
- **Grade 2**: Yield Strength ≥ 240 MPa (35,000 psi)
- **Grade 3**: Yield Strength ≥ 310 MPa (45,000 psi)

Meanwhile, the **ASTM A106 specification for seamless steel pipe includes another set of three grades**, commonly used for high-temperature service:
- **Grade A**
- **Grade B**
- **Grade C**

### 3. Class A and Class B Pipe

In the context of **ASTM A106 seamless steel pipe**, which is used for transporting fluids like water, oil, and gas under high temperatures and pressures:

- **Grade A** is comparable to China's 10# steel and is generally used for low-pressure environments or where cold bending is a priority. It has a lower minimum yield strength of 205 MPa.
- **Grade B** is comparable to China's 20# steel and is suitable for higher temperature and pressure environments. It has a higher minimum yield strength of 240 MPa.

### 4. ASTM A252 Specification

**ASTM A252** covers standard specification for **welded and seamless steel pipe piles**. In this application, the steel pipe cylinder acts as a permanent load-carrying member or as a shell to form cast-in-place concrete piles. The specification includes requirements for mechanical properties (like tensile strength and yield strength) and chemical composition, particularly limiting the Phosphorus content. It also covers permissible variations in wall thickness, weight, and diameter, as well as testing requirements.

### 5. Difference Between ASTM A106 and A252

The primary difference lies in their **intended application**:

- **ASTM A106** specifies **seamless carbon steel pipe** for **high-temperature service**. It is designed for use in conveying water, oil, and gas under high temperature and pressure conditions.
- **ASTM A252** specifies **welded or seamless steel pipe piles**. These are used as **structural foundations** in construction, such as in buildings and retaining walls, where the pipe acts as a permanent load-carrying member.

info-262-192info-262-192

Send Inquiry