Jun 25, 2025 Leave a message

What material en 10152

1. **EN 10297:**
* **Material:** Seamless circular steel tubes made from **non-alloy and alloy steel**.
* **Primary Use:** For mechanical and general engineering purposes. Common applications include hydraulic cylinders, bearings, and other high-stress components requiring good strength and toughness. Grades include C35E, 25CrMo4, 42CrMo4, etc.

2. **EN 853:**
* **Material:** **Rubber hydraulic hoses** with **wire braid reinforcement**.
* **Primary Use:** Hydraulic hoses for industrial applications requiring medium pressure resistance. The hose itself is made from synthetic rubber compounds (like NBR - Nitrile, NR - Natural Rubber, SBR, CR) reinforced with one or more layers of braided steel wire. Types include SAE 100R1AT, 100R2AT, etc.

3. **EN 58:**
* **Material:** **Withdrawn Standard.** EN 58 specified the **surface finish of stainless steel sheet, strip, and plate**. It did *not* define the base material composition itself, but rather the appearance (e.g., dull (matte), bright, reflective). It has been superseded by **EN ISO 9445** (Continuously cold-rolled stainless steel) and **EN ISO 9446** (Hot-rolled stainless steel) for dimensional and technical delivery conditions, while surface finish is now covered by standards like **EN 10088-2** (Technical delivery conditions for sheet/plate/strip) and its references.

4. **EN 10152:**
* **Material:** Cold rolled flat products made of **steel**, electrolytically **zinc-coated**.
* **Primary Use:** Sheets and strips intended for cold forming. Often used in automotive parts, appliances, and general metalworking where corrosion resistance and formability are needed. Specifies coating mass (e.g., ZE 25/25, ZE 50/50, ZE 75/75) and base steel grades (e.g., DC01, DC04, DC05, DC06).

5. **EN 26:**
* **Material:** **Alloy steel** (specifically **nickel-chromium-molybdenum steel**) in the hardened and tempered condition.
* **Primary Use:** High-strength engineering components requiring excellent toughness and fatigue resistance, such as gears, shafts, connecting rods, crankshafts, and highly stressed bolts. Its material number is **1.1126** and a common UK designation was **805A20** (or En26). Typical composition includes Nickel (Ni), Chromium (Cr), and Molybdenum (Mo).

info-351-351info-296-295

Send Inquiry