Sep 28, 2025 Leave a message

What is ER70S-2 steel pipe

**1. Is 1018 the same as A36?**

No, 1018 and A36 are not the same. They are different types of steel with key distinctions. 1018 is a carbon steel known for its higher and more consistent carbon content, which makes it easier to machine and allows it to be heat treated for increased strength. A36 is a mild, low-carbon structural steel, prized for its good strength and ductility, primarily used in structural applications like buildings and bridges. The main differences are that A36 has a specified minimum yield strength, while 1018 has a specified chemical composition.

**2. What is ER70S-2?**

ER70S-2 is a classification for a solid carbon steel wire used in Gas Metal Arc Welding (GMAW or MIG welding) and Gas Tungsten Arc Welding (GTAW or TIG welding). It is a versatile welding wire because it contains deoxidizers like silicon, manganese, and also zirconium and titanium (or sometimes aluminum). These extra deoxidizers allow it to weld on steel that has a moderate amount of surface rust, mill scale, or other impurities, making it very forgiving and producing high-quality welds with good bead appearance.

**3. What does E7018 stand for?**

E7018 is an electrode classification for a low-hydrogen, iron powder electrode used in Shielded Metal Arc Welding (SMAW or stick welding). The "E" stands for Electrode. The "70" indicates a tensile strength of 70,000 pounds per square inch (psi). The "1" means it can be used in all welding positions (flat, horizontal, vertical, and overhead). The "8" signifies the type of flux coating and the current it uses; an "8" denotes a low-hydrogen potassium flux coating and that it can be used with both AC (Alternating Current) and DCEP (Direct Current Electrode Positive).

**4. What does the S stand for in ER70S?**

The "S" in ER70S stands for "Solid" wire. This means the welding wire is a solid metal conductor, as opposed to a "cored" wire which is tubular and filled with flux or metal powders.

**5. What is the difference between ER70S-2 and ER70S-3?**

The primary difference between ER70S-2 and ER70S-3 lies in their chemical composition, specifically the type and amount of deoxidizers added. ER70S-2 contains a higher level of deoxidizers, including triple deoxidizers like zirconium, titanium, and sometimes aluminum, in addition to silicon and manganese. This makes it excellent for welding on steels with rust, scale, or other contaminants. ER70S-3 has a simpler composition, primarily using silicon and manganese as deoxidizers. It is designed for welding on clean, new steel and is the most common general-purpose MIG wire, offering good arc stability and bead appearance on clean material.

info-225-225info-225-225

Send Inquiry