Jan 08, 2026 Leave a message

What is api 5l x60 large diameter pipe yield strength

API 5L X60 large-diameter straight seam steel pipes strictly adhere to the standards and specifications set by the American Petroleum Institute. In X60, "X" represents pipeline steel, and "60" indicates a minimum yield strength of 60 ksi (approximately 414 MPa).

 

Typical mechanical properties of X60 large-diameter welded steel pipes are:

yield strength 414-517 MPa

tensile strength 517-758 MPa, elongation not less than 18%, and Charpy impact energy exceeding 40 J at -20℃.

These performance indicators ensure the safe operation of the pipeline under complex geological conditions and harsh climatic environments.

 

Applications:

 Onshore/submarine oil and gas transportation (design pressure 4-10MPa)

 Urban gas pipeline networks (must comply with GB/T 9711 equivalent standard)

 

Selection Notes:

 Charpy impact test required in environments below -20℃ (standard requirement ≥27J@-20℃)

 Low-hydrogen welding electrodes (AWS A5.1 E7018 series) are recommended for welding.

 

X60 large-diameter welded pipes primarily employ UOE or JCOE forming technologies.

The UOE process involves three key steps: First, the steel plate is pre-bent into a U-shape using a U-shaped press; then, it is pressed into a circle using an O-shaped press; finally, expansion is performed to achieve precise geometric dimensions.

Steel pipes produced using this process exhibit high dimensional accuracy and low residual stress, making them particularly suitable for manufacturing large-diameter, thick-walled pipelines.

GNEE Group uses the UOE process to produce X60M steel pipes with diameters ranging from 406-1422mm and wall thicknesses from 6-40mm, controlling the ellipticity within 0.5%, meeting the stringent geometric requirements of API 5L standards.

The JCOE process, on the other hand, uses progressive bending forming, making it more suitable for flexible production of small batches and multiple specifications.

Both processes ultimately require high-frequency welding (HFW) or submerged arc welding (SAW). Double-sided submerged arc welding (DSAW) is the preferred welding method for high-pressure pipelines due to its stable weld quality.

 

API 5L X60 Large Diameter Welded pipe factory

API 5L X60 large diameter welded steel pipe factory

Contact now

 

Send Inquiry