What is A500 GRC made of?
A500 GR.C Material Analysis (Updated 2025)
A500 GR.C (often written GRC) is a material grade of carbon steel square/rectangular tubing for structural use in the U.S. Standard, which belongs to high-strength cold-formed steel tubing under the system of ASTM A500 standard, with the following core properties:
1. Material properties
Standard Attribution: Meets the requirements of Grade C of the ASTM A500 standard for cold formed welded/seamless structural steel pipe.
Chemical Composition: Strengthened with alloying elements (e.g. manganese, silicon) on the basis of low carbon steel, with typical carbon content ≤0.23% and manganese content ≤1.35%, taking into account both strength and weldability.
Mechanical properties:
Tensile strength ≥455 MPa, yield strength ≥345 MPa (higher than GR.B grade);
Elongation ≥18%, and good toughness under low temperature environment.
2. Process and form
Manufacturing process: produced by high-frequency welding (ERW) or seamless process, and need to be normalised after cold rolling to eliminate residual stress.
Product form: square/rectangular cross-section, common wall thickness of 2-20mm, suitable for load-bearing frames and support structures.
3. Typical application scenarios
Architecture: steel frames for high-rise buildings, seismic bracing systems;
Mechanical engineering: heavy equipment skeleton, vehicle chassis;
Marine facilities: ship deck support, marine platform truss.
4. Comparison with other grades
Comparison with A500 GR.B: GR.C has higher tensile/yield strength (≥400 MPa/≥290 MPa for GR.B respectively) and is suitable for higher loading scenarios;
Compare with A513 steel: A513 focuses on machinability, while A500 GR.C has structural strength as its core strength.
Note: When selecting materials, it is necessary to check the material certificate (MTC) provided by the supplier to confirm that the actual chemical composition and mechanical properties are up to standard.






