Oct 22, 2024 Leave a message

What are the production processes of low alloy square tubes?

1. Hot rolling process: The production of low alloy square tubes first requires the raw materials (such as Q235B, Q235C, etc.) to be sent to the hot rolling mill for heating, and then rolling begins after reaching a certain temperature. During the rolling process, the pressure and speed of the rolling mill are adjusted to make the steel plastically deformed, thereby forming the required square or rectangular section. The low alloy square tube after hot rolling needs to be cooled to eliminate internal stress and improve the hardness and strength of the steel.

alloy steel square tube
2. Cold bending process: For some special shapes of low alloy square tubes, such as T-beams, I-beams, etc., cold bending process is required for production. The cold bending process is to make the hot rolled low alloy square tube into a steel strip with the same length and width at room temperature, and then bend it into the required shape by machinery. The low alloy square tube after cold bending has high dimensional accuracy and is suitable for occasions with high requirements for steel size.

cold steel welded pipe

Send Inquiry