**1. How thick is P265GH plate?**
The thickness of P265GH steel plate depends on the application and manufacturing specifications. P265GH is standardized under EN 10028-2 for pressure vessel use, and its thickness typically ranges from **3 mm to 200 mm**, though specific dimensions are determined by project requirements. The material properties (e.g., strength, toughness) are certified for these thickness ranges.
**2. What is P235GH material?**
P235GH is a **non-alloy steel grade** designed for elevated temperature service, standardized under EN 10028-2. It is used for pressure vessels and boilers. Key properties include:
- **Chemical composition**: ≤0.16% C, ≤0.60% Mn, ≤0.035% P, ≤0.030% S.
- **Mechanical properties**: Minimum yield strength of **235 MPa**, tensile strength of **360-510 MPa**.
- **Applications**: Low-to-medium pressure components operating at temperatures up to **350°C**.
**3. Difference between P235GH and P265GH?**
- **Strength**: P265GH has higher minimum yield strength (**265 MPa**) compared to P235GH (235 MPa).
- **Carbon content**: P265GH typically has slightly higher carbon (≤0.20% vs. ≤0.16% for P235GH).
- **Applications**: P265GH is used for higher-pressure systems, while P235GH suits lower-pressure environments.
**4. Is WPB carbon steel?**
Yes, **WPB** is a **carbon steel grade** defined in ASTM A234 for pipe fittings. It is suitable for moderate-temperature and pressure service, with a maximum carbon content of 0.30% and tensile strength of **415-585 MPa**.
**5. What is P235GH pipe equivalent to?**
P235GH (EN 10216-2) is broadly comparable to:
- **ASTM/ASME**: SA-285 Grade C or SA-516 Grade 55 (similar yield strength and applications).
- **Other standards**: DIN 17155-19Mn6 (historical German standard).
*Note*: Exact equivalence depends on specific requirements (e.g., temperature, pressure, regional codes). Always verify with design standards.







