PSL1 and PSL2 of oil pipeline are API (American Petroleum Institute, American Petroleum Institute) two product specification levels under the 5L standard, the main difference between them lies in the different quality requirements and technical indicators.
1. Chemical composition,
PSL1 basic requirements, PSL2 higher chemical composition requirements.
2. Mechanical properties,
PSL1 basic requirements, PSL2 higher mechanical properties requirements.
3. Impact performance,
PSL1 does not require, PSL2 except X80 steel grade, full-size 0℃ Akv average value: longitudinal ≥41J, transverse ≥27J; X80 steel grade, full-size 0℃ Akv average value: longitudinal ≥101J, transverse ≥68J.
4. Non-destructive testing,
PSL1 does not require, PSL2 should be non-destructive testing branch by branch
5. Hydrostatic test, PSL1 should be hydrostatically tested branch by branch, PSL2 should be hydrostatically tested branch by branch, non-destructive substitution for hydrostatic is not allowed.
6. Pipe end treatment, PSL1 does not require special treatment, PSL2 pipe ends must be sandblasted.






