Stainless steel pipe weld nondestructive testing mainly uses the following methods:
1. X-ray inspection
Can through the light can not pass through the material, check the weld head there is no porosity, welding is not secure, cracks, slag, and shrinkage and other phenomena; detect the defects at the plane position and size, can detect the defects at the plane position and size and so on. However, it is usually difficult to find defects in the pipeline, some smaller cracks on the weld, etc., but also can not detect the depth of defects and other factors.

2. Ultrasonic inspection
The use of ultrasonic detection principle, when encountered with a certain interface will be reflected back. The system can detect raw materials and stainless steel pipe, but also in the welding process to find problems, can determine the location of the problem and the corresponding size parameters, has a very strong penetration, the maximum penetration 10cm thick. However, the problems existing in the weld of coarse crystal materials can not be detected, in addition, the location and shape of the defects have a great impact on the detection results.
3. Magnetic particle inspection
The basic principle is that, after the stainless steel pipe is magnetised, if there are some problems in the interior, the distribution of the magnetic channel will change to some extent. This method can mainly detect the problems existing in the face opening or near face in the magnetic material. However, this method is usually difficult to detect the relatively complex stainless steel pipeline.

4. Penetration detection
It is the use of capillary phenomenon to let the penetrant into the defects, and then the stainless steel pipe is cleaned to remove excessive penetrant. Use the developer as a fine water absorption phenomenon, the penetrant adsorbed in the defects, so as to detect some smaller problems in time.
The above is the non-destructive testing of stainless steel pipes introduced to you. To ensure product quality, GNEE Group will also conduct ultrasonic testing, mechanical performance testing, impact testing, etc. You can contact us at any time.





