Jul 18, 2025 Leave a message

Production process of Q235C steel pipe

Q1: What are the main manufacturing methods of Q235C steel pipe?
The production process of Q235C steel pipe mainly includes hot rolling, cold drawing, and welding (straight seam welding/spiral welding). Hot-rolled seamless steel pipes are made by perforation, rolling and other processes, which are suitable for high-pressure and high-strength scenarios; cold-drawn steel pipes have higher precision, but higher costs; welded steel pipes have high production efficiency and are suitable for low-pressure fluid transportation. In addition, Q235C can also be made by high-frequency resistance welding (ERW) or submerged arc welding (SAW), and the specific choice depends on the purpose and cost.

Q2: What are the heat treatment methods of Q235C steel pipe?
The heat treatment methods of Q235C steel pipe include normalizing, annealing, and tempering (quenching + tempering). Normalizing can refine the grains, improve strength and toughness; annealing is used to eliminate cold working stress and improve plasticity; tempering can significantly improve the comprehensive mechanical properties, but the cost is high. Usually, Q235C steel pipes are delivered in hot-rolled or normalized state, and welded steel pipes may be annealed to eliminate residual stress.

Q3: What are the surface treatment methods for Q235C steel pipes?

The surface treatment methods for Q235C steel pipes include sandblasting, galvanizing, painting, and black pipes (no treatment). Galvanizing (hot-dip or electroplating) can improve corrosion resistance and is suitable for outdoor structures; painting (such as epoxy resin) is suitable for chemical or marine environments; sandblasting can remove oxide scale and improve surface quality. Black pipes (no treatment) have the lowest cost, but are prone to rust and need to be used in dry environments.

Q4: How to control the dimensional tolerance of Q235C steel pipes?

The dimensional tolerance of Q235C steel pipes is controlled according to GB/T 3091 (welded pipes) or GB/T 8162 (seamless pipes). The outer diameter tolerance is usually ±1%, the wall thickness tolerance is ±10%, and the length tolerance is +50mm/-0mm. The tolerance of precision cold-drawn steel pipe is stricter, up to ±0.1mm. Strict tolerance control can ensure the assembly accuracy of the steel pipe and is suitable for mechanical structural parts.

Q5: What is the welding performance of Q235C steel pipe?
Q235C steel pipe has good welding performance and can be welded by manual arc welding (SMAW), gas shielded welding (MIG/MAG), submerged arc welding (SAW) and other methods. Due to its low carbon equivalent (Ceq) (about 0.3-0.4), the tendency of cold cracking during welding is small, but the preheating temperature (usually 100-150℃) and slow cooling after welding still need to be controlled. For thick-walled pipes, it is recommended to use low-hydrogen electrodes (such as J427) to reduce the risk of hydrogen-induced cracking.

info-259-194info-276-183info-252-200

Send Inquiry