Mar 09, 2026 Leave a message

pressure resistance of seamless pipes

1. What is the difference between seamless steel pipes and ERW (Electric Resistance Welded) pipes? Seamless steel pipes have no welding seams, produced by piercing and rolling solid billets, with uniform structure and high pressure-bearing capacity, suitable for high-pressure, high-temperature, and corrosive environments. ERW pipes are produced by welding steel strips using electric resistance welding (high-frequency or low-frequency), with a single welding seam along the length of the pipe. ERW pipes have lower production costs, higher production efficiency, and are suitable for large-scale production of medium and low-pressure pipes (e.g., water, gas, and oil transportation). However, ERW pipes have a weak point at the weld seam, which may be prone to leakage under high pressure or harsh conditions, so they are not suitable for high-risk applications such as high-pressure oil and gas pipelines.

2. What is the maximum temperature that seamless steel pipes can withstand, and which grades are suitable for high-temperature applications? The maximum temperature that seamless steel pipes can withstand depends on their material grade and heat treatment. Ordinary carbon steel seamless pipes (such as 10#, 20#) can withstand a maximum temperature of 350-400℃. Low-alloy seamless pipes (such as 16Mn, 15CrMoG) can withstand 400-500℃. High-alloy seamless pipes (such as 12Cr1MoV, 25Cr2MoVA) can withstand 500-600℃. For ultra-high-temperature applications (above 600℃), special alloy seamless pipes (such as Inconel, Hastelloy) are required, which contain high levels of nickel, chromium, and other elements to ensure high-temperature strength and oxidation resistance. These high-temperature seamless pipes are mainly used in power plants, petrochemical plants, and aerospace fields.

3. How to test the pressure resistance of seamless steel pipes? The pressure resistance test (hydrostatic test) is the main method to test the pressure-bearing capacity of seamless steel pipes. The test process is as follows: fill the pipe with water (or other test medium), seal both ends, and apply pressure to the inside of the pipe using a pressure pump. The test pressure is usually 1.5 times the nominal pressure of the pipe, and the pressure is maintained for a certain period of time (usually 30-60 minutes). During the test, check for leaks, deformation, or bursts on the pipe surface and joints. If no leaks or abnormal phenomena occur, the pipe is considered to pass the pressure resistance test. Additionally, for high-pressure pipes, additional tests such as pneumatic pressure test or fatigue test may be required to ensure long-term service safety.

4. What is the application of seamless steel pipes in the chemical industry? In the chemical industry, seamless steel pipes are widely used to transport various chemical media (such as acids, alkalis, salts, and organic solvents) and to manufacture chemical equipment (such as reactors, heat exchangers, and pipelines). Due to the corrosive, high-pressure, and high-temperature characteristics of chemical media, seamless steel pipes used in the chemical industry must have good corrosion resistance and pressure resistance. Common grades include 304, 316L (stainless steel seamless pipes) for corrosive media, 12Cr1MoV, 15CrMoG (alloy steel seamless pipes) for high-temperature and high-pressure media, and 20# (carbon steel seamless pipes) for general chemical fluids. Seamless pipes in the chemical industry must undergo strict corrosion resistance testing and non-destructive testing to avoid leakage and safety accidents.

5. What is the meaning of "seamless steel pipe eccentricity, and how to control it? Seamless steel pipe eccentricity refers to the phenomenon where the center of the inner diameter of the pipe is not aligned with the center of the outer diameter, resulting in uneven wall thickness (one side is thicker, the other side is thinner). Eccentricity will reduce the pipe's pressure-bearing capacity and structural stability, and even cause failure under high pressure. To control eccentricity: first, ensure the steel billet is of uniform size and roundness; second, adjust the piercing process (e.g., control the piercing speed, temperature, and the position of the piercer) to ensure the billet is pierced evenly; third, optimize the rolling process to adjust the wall thickness distribution; and fourth, use precision rolling equipment and online monitoring systems to detect and correct eccentricity in a timely manner.

info-259-194info-259-194

Send Inquiry