

P235TR1 Carbon Steel Boiler Steel Pipe
P235TR1 is a European standard grade of non-alloy fine-grained steel tube specifically designed for pressure purposes and elevated temperature service, such as in boilers and heat exchangers. It is defined under the European standard EN 10216-2: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties.
Key Characteristics:
Material: Non-alloy (carbon) steel with fine grain structure.
Primary Application: Manufacturing of boilers, superheaters, and pressure vessels where the material is subjected to internal pressure and elevated temperatures.
Key Property: Guaranteed minimum yield strength and tensile strength at room temperature, as well as specified creep resistance and high-temperature strength properties.
Manufacturing Process: Typically supplied as seamless tubes to ensure integrity under high pressure.
Designation Meaning:
P: Stands for "Pressure" purpose.
235: Indicates the minimum yield strength (ReH) in MPa at room temperature.
TR1: Stands for Tube, Rotor, and Pressure vessel steel, Grade 1. The "TR" category signifies steels with verified elevated temperature properties.
Technical Parameter Table
The following table summarizes the key chemical composition and mechanical properties as per EN 10216-2.
Table 1: Chemical Composition (Maximum Values in % by weight)
| Element | Carbon (C) | Silicon (Si) | Manganese (Mn) | Phosphorus (P) | Sulfur (S) | Aluminum (Al) |
|---|---|---|---|---|---|---|
| Value | 0.13 | 0.35 | 0.70 - 1.20 | 0.025 | 0.020 | ≥ 0.020 |
Note: The fine grain structure is achieved through aluminum treatment (Al content).
Table 2: Room Temperature Mechanical Properties
| Property | Yield Strength (ReH), min | Tensile Strength (Rm) | Elongation (A), min |
|---|---|---|---|
| Value | 235 MPa | 360 - 480 MPa | 25% |
Table 3: Example of Elevated Temperature Properties (Minimum Yield Strength - Rp0.2, in MPa)
| Test Temperature (°C) | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 |
|---|---|---|---|---|---|---|---|---|
| Rp0.2, min (MPa) | 186 | 167 | 150 | 139 | 131 | 125 | 119 | 114 |
Note: The values in Table 3 are for reference. Exact guaranteed values depend on wall thickness and are specified in the standard's annexes. Design must be based on the standard's guaranteed stress values for calculation.
Common Equivalent Grades
| Standard | Equivalent Grade | Remark |
|---|---|---|
| ISO 9329-2 | P235GH | Very similar, commonly used as an equivalent. |
| DIN 17175 | St35.8 / St35.8III | Older German designation, similar application. |
| ASTM/ASME | SA-192 (for high-pressure boiler tubes) or SA-106 B | Not direct equivalents. SA-106 B is for high-temperature service but different specification system. Selection requires detailed comparison. |
Applications
Boiler Tubes: Water wall tubes, economizers, and superheater coils in fossil fuel power plants and industrial boilers.
Heat Exchanger Tubes: For heating surfaces in various process industries.
Pressure Piping: For steam and hot water lines within specified temperature and pressure limits.
In summary, P235TR1 is a standardized European carbon steel grade for seamless pressure tubes, offering a balanced combination of strength, formability, and guaranteed performance at elevated temperatures, making it a fundamental material for boiler construction.





