Nov 22, 2023 Leave a message

Mechanical properties of steel

straight seam pipeseam welded pipewelded pipe

1. Yield point (σ S)

When the steel or sample is stretched, the stress exceeds the elastic limit, even if the stress does not increase, the steel or sample continues to undergo significant plastic deformation. This phenomenon is called yielding, the minimum stress value is the yield point. If Ps is the yield point s at the external force, Fo is the cross-sectional area of the sample, then the yield point σS = Ps/Fo (MPa).

 

2, yield strength ( σ 0.2)

The yield point of some metallic materials is extremely inconspicuous and therefore difficult to measure. Therefore, in order to measure the yield characteristics of the material, the provisions of the permanent residual plastic deformation when equal to a certain value (usually 0.2% of the original length) when the stress generated is called the condition of yield strength or simply yield strength σ 0.2.

 

3. Tensile strength (σ B)

Tensile process from the beginning to the occurrence of rupture reached the maximum stress value. It represents the ability of steel to resist fracture. Corresponding to the tensile strength are compression strength, bending strength, etc. If Pb is the maximum tensile force reached before the material is pulled apart and Fo is the cross-sectional area of the sample, the tensile strength σ B = Pb/Fo (MPa).

 

4. Elongation (δ S)

The percentage of plastic elongation of a material after fracture with respect to the original specimen length is called elongation or stretch.

 

 

Send Inquiry