What is the performance difference between Q235B and Q345B welded pipes?
Q235B is a low-carbon steel (C≤0.2%) with a yield strength of 235MPa, suitable for ordinary structures; Q345B is a low-alloy steel (containing Mn, V) with a yield strength of 345MPa, used in heavy-duty occasions such as bridges. Q345B welding requires preheating to 150°C to prevent cracks, and the cost is 15%-20% higher than Q235B. Both must comply with GB/T 700-2006 standards.
What are the production difficulties of stainless steel high-frequency welded pipes (such as 304)?
304 stainless steel has poor thermal conductivity (only 1/3 of carbon steel), and the welding speed needs to be reduced to 10-15m/min to avoid overheating. The forming roller needs to be chrome-plated to reduce scratches, and solid solution treatment (1050°C rapid cooling) is required after welding to restore corrosion resistance. The weld needs to pass the 10% oxalic acid etching test to test intergranular corrosion.
What are the differences in alloy design between API 5L X60 and X80 welded pipes?
X60 (yield strength ≥ 415MPa) adds 0.1%-0.25% Nb to refine grains; X80 (≥ 555MPa) adds additional 0.05% Mo and 0.03% Ti, and uses TMCP process to control cooling. The carbon equivalent (CEIIW) of X80 needs to be ≤ 0.43%, and the welding preheating temperature reaches 200℃.
Why is the silicon content of galvanized welded pipe limited?
Si>0.05% in steel will cause the galvanized layer to be too thick (>100μm) and poor adhesion, resulting in the "Sanderin effect". Galvalume coating (55% Al-Zn) can improve the uniformity of the coating of high silicon steel (such as SGH440) and increase the corrosion resistance by 3 times.
What material is used for welded pipes in low temperature environments?
-46℃ cryogenic pipes require L245NB (GB/T 9711), with Ni added (≤0.3%) and a -60℃ impact test. X70 welded pipes for Arctic pipelines require a DWTT (drop weight tear test) shear area of ≥85%.








