May 19, 2025 Leave a message

Material properties of steel pipes

**1. Property of S355 Material**
S355 is a European standard **structural steel** with good weldability and toughness. Key properties:
- **Yield Strength**: ≥355 MPa (hence "S355").
- **Tensile Strength**: 470–630 MPa.
- **Elongation**: 20–25% (depending on grade/subtype).
- **Applications**: Bridges, buildings, machinery.
- **Standards**: EN 10025-2.

---

**2. 1.2210 Material Properties**
1.2210 (DIN designation) is a **cold-work tool steel** (similar to AISI L3). Key properties:
- **Composition**: ~1.0% C, 1.2% Cr, 0.2% V.
- **Hardness**: Up to 64 HRC after heat treatment.
- **Wear Resistance**: High.
- **Applications**: Cutting tools, punches, dies.

---

**3. Properties of 1.0601 Material**
1.0601 (EN designation) is a **carbon steel** (equivalent to C60 or 1.0601). Key properties:
- **Composition**: ~0.60% C, low alloy content.
- **Tensile Strength**: 700–850 MPa.
- **Hardness**: 200–250 HB.
- **Applications**: Springs, shafts, gears.

---

**4. Chrome Vanadium vs. Stainless Steel**
- **Chrome Vanadium (Cr-V)**:
- Higher strength/toughness.
- Good wear resistance.
- Prone to corrosion (needs coating).
- Used in tools (e.g., wrenches).
- **Stainless Steel**:
- Lower strength but excellent corrosion resistance.
- Common grades (e.g., 304/316) for wet/chemical environments.
- **Conclusion**: Depends on application-Cr-V for strength, stainless for corrosion resistance.

---

**5. Properties of 1.2714 Material**
1.2714 (DIN) is a **hot-work tool steel** (similar to AISI 6F3). Key properties:
- **Composition**: 0.55% C, 1.3% Cr, 0.5% Ni, 0.5% Mo.
- **Heat Resistance**: Retains hardness up to 500°C.
- **Toughness**: High, suitable for impact loads.
- **Applications**: Forging dies, extrusion tools.

 

info-466-453info-479-441

Send Inquiry