Jun 10, 2025 Leave a message

How are welded steel pipes produced?

1. Raw material acceptance
The steel pipes entering the factory are inspected for material, specifications, surface quality, etc. to ensure that they meet production requirements. Only qualified raw materials can ensure the subsequent production of welded steel pipes that meet quality standards.

2. Pretreatment
Including cutting, straightening, rust removal and other processes. These operations can remove impurities and oxide layers, laying a good foundation for subsequent processing. For example, when producing small and medium diameter thick-walled electric welded steel pipes, rolled plates are usually used as the main raw material. The purchased rolled plates need to undergo pretreatment processes such as flattening and shearing to eliminate surface defects and unevenness.

3. Continuous forming
Use U-shaped or O-shaped molds to roll steel plates into pipe blanks. This process will be completed by bending and rolling through pre-bending machines, forming machines and other equipment. Straight seam submerged arc welded pipe (LSAW) uses U-shaped or O-shaped steel plates. Different types of welded pipes have different forming methods. For example, the forming process of UOE straight seam submerged arc welded pipe includes steel plate pre-bending, U-shaped forming and O-shaped forming; JCOE straight seam submerged arc welded pipe forming is to form the steel plate in the order of J-type - C-type - O-type; straight seam high-frequency welded pipe is formed by hot-rolled coils through a forming machine.
For welded pipes of different specifications, such as spiral pipes and straight seam pipes, the forming process and equipment are different, but the overall process framework is the same.
4. Welding process
In terms of welding equipment, some use new equipment from Lincoln Company in the United States, and control welding parameters such as current, voltage, speed, etc. through computers and PLCs. Common welding methods include double-sided submerged arc welding used in straight seam submerged arc welded pipes, and straight seam high-frequency welded pipes use the skin effect and proximity effect of high-frequency current to heat and melt the edge of the tube blank and perform pressure welding.
5. Sizing and straightening
Sizing and straightening of welded pipes to meet relevant standards and usage requirements

info-400-266

Send Inquiry