

GB/T 3091 Spiral Submerged Arc Welded Steel Pipe - Clarification and Technical Details
1. Critical Clarification: Scope Error
Important Correction: GB/T 3091 is NOT a standard for spiral submerged arc welded (SSAW) pipes. The standard's actual title is:
GB/T 3091-2015 "Welded steel pipes for low pressure fluid conveyance"
This standard primarily covers electric resistance welded (ERW) steel pipes and some other welding processes, but explicitly excludes spiral submerged arc welded pipes.
What GB/T 3091 Actually Covers:
Electric Resistance Welded (ERW) pipes - Main product
Longitudinal Submerged Arc Welded (LSAW) pipes - Secondary inclusion
Spiral Submerged Arc Welded (SSAW) pipes - EXPRESSLY EXCLUDED (See Clause 1 of the standard)
2. Correct Standards for SSAW Pipes in China
If you need specifications for Spiral Submerged Arc Welded (SSAW/HSAW) Pipes, here are the correct Chinese standards:
Table 1: Chinese Standards for SSAW Pipes
| Standard Number | Full Title (English) | Application | Equivalent/Related to |
|---|---|---|---|
| GB/T 9711-2017 | Petroleum and natural gas industries - Steel pipe for pipeline transportation systems | High-pressure oil & gas pipelines | ISO 3183, API 5L |
| SY/T 5037-2012 | Spiral submerged arc welded steel pipe for low pressure fluid transmission | Low-pressure fluids, water, drainage | - |
| GB/T 13793-2016 | Straight seam electric resistance welded steel pipes | General purpose (not SSAW) | - |
| GB/T 14291-2016 | Mine welded steel pipe for fluid transmission | Mining applications | - |
Note: GB/T 9711 is the primary standard for oil & gas SSAW pipelines in China, equivalent to API 5L/ISO 3183.
3. GB/T 3091 Actual Content (For Reference)
Since you inquired about GB/T 3091, here are its actual specifications:
Table 2: GB/T 3091 Scope & Key Parameters
| Parameter | Specification |
|---|---|
| Standard Name | Welded steel pipes for low pressure fluid conveyance |
| Edition | GB/T 3091-2015 (Current) |
| Welding Processes | Electric Resistance Welding (ERW), Longitudinal Submerged Arc Welding (LSAW) |
| Excluded Processes | Spiral Submerged Arc Welding (SSAW), Spiral Resistance Welding |
| Applications | Water, gas, air, heating, steam, etc. (Low pressure, PN ≤ 1.6MPa) |
| Pressure Rating | Nominal pressure ≤ 1.6MPa (232 psi) |
| Service Temperature | 0°C to 100°C |
Table 3: Steel Grades in GB/T 3091
| Grade | Yield Strength (min, MPa) | Tensile Strength (MPa) | Elongation (%) | Equivalent |
|---|---|---|---|---|
| Q195 | 195 | 315-430 | 22 | ASTM A53 Gr.A |
| Q215A | 215 | 335-450 | 22 | - |
| Q215B | 215 | 335-450 | 22 | - |
| Q235A | 235 | 370-500 | 20 | ASTM A53 Gr.B |
| Q235B | 235 | 370-500 | 20 | - |
| Q235C | 235 | 370-500 | 20 | - |
| Q235D | 235 | 370-500 | 20 | - |
| Q275A | 275 | 410-540 | 18 | - |
| Q275B | 275 | 410-540 | 18 | - |
| Q275C | 275 | 410-540 | 18 | - |
Table 4: Size Range (GB/T 3091)
| Dimension | Range | Typical Sizes |
|---|---|---|
| Outside Diameter | 6mm - 2540mm | DN15-DN2600 |
| Wall Thickness | 0.5mm - 25.4mm | Schedule 5S to XXS |
| Length | 4-12 meters | Random or fixed lengths |
4. Why the Confusion?
The confusion between GB/T 3091 and SSAW pipes likely arises from:
Similar Applications: Both are used for low-pressure fluid conveyance
Market Misrepresentation: Some suppliers incorrectly label products
Historical Changes: Earlier versions might have had different scopes
Translation Issues: "Welded steel pipe" being misinterpreted
5. How to Correctly Specify SSAW Pipes
For Chinese Projects:
Scenario 1: Oil & Gas Pipelines
text
Standard: GB/T 9711-2017 (PSL2) Grade: L245, L290, L360, L415, etc. Manufacturing: Spiral Submerged Arc Welding (SSAW/HSAW) Supplement: Specify if sour service, offshore, etc.
Scenario 2: Low-Pressure Water/Gas
text
Standard: SY/T 5037-2012 Grade: Q235, Q345, etc. Manufacturing: Spiral Submerged Arc Welding Pressure: Specify design pressure ≤ 1.6MPa
Scenario 3: Mine Applications
text
Standard: GB/T 14291-2016 Grade: Q235A/B/C, Q345A/B/C, etc. Manufacturing: Can include SSAW for large diameters
For International Projects:
text
Primary Standard: API 5L (PSL1 or PSL2) Alternative: ISO 3183 Grade: X42, X52, X60, X65, X70, etc. Process: HSAW (Helical SAW)
6. Key Differences: ERW vs SSAW
Table 5: Manufacturing Process Comparison
| Aspect | ERW (GB/T 3091) | SSAW (SY/T 5037/GB/T 9711) |
|---|---|---|
| Forming | Roll formed from strip, straight seam | Spiral formed from coil/plate |
| Welding | Electric resistance (no filler) | Submerged arc (wire + flux) |
| Weld Quality | Heat-affected zone issues possible | Deeper penetration, better fusion |
| Size Range | Small to large diameter | Typically large diameter (≥20") |
| Production Speed | Very high | Moderate |
| Cost | Lower for standard sizes | Competitive for large diameters |
| Applications | Low-pressure, structural | Pipelines, piling, structural |
7. Quality Control Comparison
Table 6: Testing Requirements
| Test Type | GB/T 3091 (ERW) | GB/T 9711 (SSAW) |
|---|---|---|
| Hydrostatic | Mandatory (≤80% YS) | Mandatory (≥90% SMYS) |
| Flattening | Required | Required |
| Tensile | Batch testing | Each heat/heat treatment |
| NDT on Weld | Optional/spot check | 100% RT or AUT mandatory |
| Impact Test | For certain grades/temp | Mandatory for all pipes |
| Hardness | Not required | Often required |
| Chemical Analysis | Batch basis | Each heat of steel |
8. Procurement Recommendations
For Buyers/Specifiers:
Verify the Standard: Always check Clause 1 "Scope" of the standard
Specify Clearly:
text
Incorrect: "GB/T 3091 SSAW pipe" Correct: "GB/T 9711 PSL2 L415M SSAW pipe" or "SY/T 5037 Q345 SSAW pipe"
Request Certification: Mill Test Certificate matching the specified standard
Inspection: Third-party inspection for critical applications
Marking Verification: Check pipe marking against specification
Red Flags:
Supplier claims "GB/T 3091 SSAW pipe"
Certificate doesn't match standard requirements
No mention of NDT method for weld seam
Hydrostatic test pressure too low
9. Industry Practice Insights
Domestic Chinese Projects:
Water pipelines: Often use SY/T 5037 SSAW
Gas distribution: May use GB/T 3091 ERW for smaller diameters
Oil transmission: Must use GB/T 9711 or API 5L
Export Projects:
Typically require API 5L or ISO 3183
GB/T 9711 is increasingly accepted (identical to ISO 3183)
Quality Trends:
GB/T 3091 is considered a basic standard
SSAW pipes under GB/T 9711 meet international quality levels
Many manufacturers produce to both Chinese and international standards
Summary Conclusion
GB/T 3091 ≠ SSAW Pipe Standard
It's primarily for ERW pipes
Excludes spiral welding processes
For low-pressure applications only
Correct SSAW Standards:
High-pressure oil/gas: GB/T 9711 (API 5L/ISO 3183 equivalent)
Low-pressure fluids: SY/T 5037
Mining applications: GB/T 14291
Always Verify:
Standard scope in Clause 1
Manufacturing process
Testing requirements
Certification documents
Recommendation: For spiral submerged arc welded pipes intended for any significant pressure service or pipeline application, specify GB/T 9711 (equivalent to API 5L/ISO 3183) rather than general fluid conveyance standards.





