Dec 23, 2025 Leave a message

EN10217 Longitudinally Submerged Arc Welding Pipe

info-225-225info-225-225

EN10217 Pressure Purpose Welded Steel Tubes

EN10217 is the European standard series for welded steel tubes intended for pressure purposes. This includes applications in boilers, heat exchangers, and pressure piping systems. Unlike EN10210 (structural) and EN10219 (cold-formed structural), EN10217 tubes are designed to contain internal pressure.

Key Distinction: Pipes to EN10217 are subject to much more rigorous weld testing, pressure testing, and non-destructive examination (NDE) due to their safety-critical function.


1. Standard Structure: EN10217-1 to EN10217-7

The standard is divided into parts based on material type and required inspection levels. The parts most relevant to carbon steel LSAW pipes are:

EN10217-1: Non-alloy steel tubes with specified room temperature properties. (Covers most standard LSAW pipes for general pressure service).

EN10217-2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties.

EN10217-5: Submerged arc welded non-alloy and alloy steel tubes with specified room and elevated temperature properties. (This is the primary part for LSAW pipes).


2. The LSAW Process in EN10217-5

EN10217-5 specifically governs tubes manufactured by submerged arc welding (SAW) from strip/plate, with one or two longitudinal seams. It is the definitive European standard for pressure-rated LSAW pipe.

Typical Manufacturing Route (UOE/JCO):

Plate Preparation: Steel plates (to standards like EN10025 or EN10028) are edge-machined.

Forming: Plates are cold-formed into a "U" shape, then an "O" shape (UOE), or via a step-by-step JCO press.

Welding: The longitudinal seam(s) are welded using the Submerged Arc Welding (SAW) process, often with multiple passes (inside and outside).

Sizing & Testing: The welded cylinder is expanded (sized), heat-treated if required, and subjected to extensive NDT and hydrostatic testing.


3. Steel Grades & Mechanical Properties (EN10217-5)

The grades are designated for pressure service, with requirements for room temperature (RT) and often elevated temperature strength.

Table 1: Common Steel Grades for LSAW Pipe (EN10217-5 Extract)

Steel Designation Number Minimum Yield Strength (ReH) MPa Tensile Strength (Rm) MPa Impact Toughness (KV) Notes
P235TR2 1.0308 235 360 - 500 Not specified General purpose
P265TR2 1.0309 265 410 - 540 Not specified General purpose
P295TR2 1.0486 295 430 - 580 Not specified General purpose
P355TR2 1.0565 355 490 - 630 Tested at -20°C Improved toughness
P460NH 1.8915 460 570 - 720 40 J avg / 30 J min at -20°C Normalized, high strength

Note: The "TR2" suffix typically indicates delivery condition (e.g., thermomechanically rolled). "NH" indicates normalized for improved toughness.


4. Inspection and Testing (Critical for Pressure Tubes)

EN10217, especially Part 5, mandates a rigorous quality regime:

Table 2: Key Testing Requirements for LSAW Pipe (EN10217-5)

Test Type Requirement Standard
Hydrostatic Test Mandatory on every tube. Pressure ≥ calculated test pressure (P<sub>test</sub>) for a minimum hold time. EN ISO 10893-4
Non-Destructive Examination (NDE) 100% of the weld seam must be examined by:
• Ultrasonic Testing (UT) AND/OR
• Radiographic Testing (RT)
EN ISO 10893-7 / -8 / -9
Tensile Test Per batch/lot. EN ISO 6892-1
Impact Test Required for designated grades (e.g., P355TR2, P460NH) at specified temperatures. EN ISO 148-1
Flattening Test or Bend Test Per batch/lot, to demonstrate weld ductility. EN 10217-5 Annex A
Visual & Dimensional Check On every tube.  

5. Dimensions & Tolerances

EN10217-5 covers a wide range of diameters and wall thicknesses suitable for LSAW.

Table 3: Typical Size Range for LSAW Pipe (EN10217-5)

Outside Diameter (D) Typical Wall Thickness (t) Range Common Lengths
168.3 mm (6") and above 4.0 mm to 40+ mm Single Random (6-7m), Double Random (11-13m), or specified lengths up to ~18m.
Up to 2,500 mm+ Can be very heavy (e.g., > 50mm) for offshore applications.  

Tolerances are strict and defined in the standard (±% on diameter, ±% on wall thickness, straightness limits).


6. Comparison: LSAW in Different EN Standards

Feature EN10217 (Pressure Tubes) EN10210 (Hot-Fin. Structural) EN10219 (Cold-Form. Structural)
Primary Purpose Contain Pressure Load Bearing (Static) Load Bearing (Static)
Key Test Hydrostatic Test (100%) Tensile/Impact/Flattening Tensile/Impact/Flattening
NDT Requirement 100% Weld UT/RT (Mandatory) 100% Weld UT common Visual & spot checks typical
Typical Application Pipeline, Process Plant, Risers Building Columns, Bridges Light Structures, Architectural
Material Focus Pressure Vessel Steels Structural Steels Structural Steels
Weld Quality Focus Extremely High High Standard

Conclusion

EN10217, and specifically Part 5 (EN10217-5), is the principal European standard governing the manufacture of high-integrity, pressure-rated, longitudinally submerged arc welded (LSAW) pipes.

When you specify an "EN10217 LSAW Pipe", you are specifying a product designed for safety-critical pressure containment, backed by:

Mandatory 100% weld seam NDT (Ultrasonic or Radiographic inspection).

Mandatory hydrostatic pressure testing on every single pipe.

Strict material and chemical requirements for pressure service.

Traceability and certification to a recognized pressure equipment standard.

This makes it the specification of choice for oil and gas transmission pipelines, process industry piping, offshore risers, and any application where internal pressure is the primary design consideration.

Send Inquiry