

Overview: What is EN 10216-2?
EN 10216-2 is a European standard titled "Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties."
In simple terms, it defines the requirements for seamless steel pipes designed to operate under pressure at high temperatures. These are critical components in systems where failure is not an option.
Key Takeaway: If you see a pipe marked with EN 10216-2, you know it's a high-quality, seamless pipe certified for use in demanding pressure and temperature environments.
Key Characteristics and Scope
Seamless Manufacture: The pipes are made without a welded seam, making them inherently stronger and more reliable for high-pressure applications. They are typically manufactured through processes like hot extrusion or piercing a solid billet.
Pressure Purposes: The primary design intent is for containing internal pressure (e.g., steam, hot water, oil, gas).
Elevated Temperature Properties: The standard specifies mechanical properties (like tensile strength and yield strength) that the steel must maintain at high temperatures. This is crucial for applications like power boilers and process heaters.
Non-Alloy & Alloy Steels: The standard covers both carbon steels (non-alloy) and low-alloy steels (with elements like Chromium and Molybdenum for enhanced strength and temperature resistance).
Common Steel Grades in EN 10216-2
The standard defines various steel grades, each with a specific chemical composition and mechanical property profile. The most common ones are:
Non-Alloy / Carbon Steels:
P195GH: A general-purpose carbon steel grade for temperatures up to ~300°C.
P235GH: The most common carbon steel grade for pressure purposes. Good weldability and formability.
P265GH: Higher strength than P235GH, used for higher pressure applications.
Alloy Steels (with Chrome-Molybdenum):
These grades offer superior strength at higher temperatures and better resistance to oxidation.
13CrMo4-5: Contains about 0.8% Chromium and 0.5% Molybdenum. Good for temperatures up to ~550°C.
10CrMo9-10: Contains about 2.25% Chromium and 1% Molybdenum. A very common alloy for high-temperature service (e.g., steam lines in power plants).
X10CrMoVNb9-1 (P91): An advanced high-strength alloy steel with Chromium, Molybdenum, Vanadium, and Niobium. Used in ultra-supercritical power plants for its exceptional high-temperature strength.
The naming convention often gives a clue about the composition (e.g., CrMo indicates Chrome-Molybdenum steel).
Typical Chemical Composition & Mechanical Properties (Examples)
Here is a simplified table for the most common carbon steel grades:
| Steel Grade | C (max) | Mn | Si | P (max) | S (max) | Yield Strength (min, MPa) | Tensile Strength (MPa) |
|---|---|---|---|---|---|---|---|
| P195GH | 0.13 | 0.70 - 1.20 | 0.10 - 0.35 | 0.025 | 0.020 | 195 | 320 - 540 |
| P235GH | 0.16 | 0.80 - 1.20 | 0.10 - 0.35 | 0.025 | 0.020 | 235 | 360 - 480 |
| P265GH | 0.20 | 0.80 - 1.40 | 0.10 - 0.40 | 0.025 | 0.020 | 265 | 410 - 530 |
Note: These are indicative values. The full standard specifies different values based on wall thickness and heat treatment condition.
Manufacturing Process and Testing
Pipes conforming to EN 10216-2 undergo strict quality control, which may include:
Non-Destructive Testing (NDT): Ultrasonic testing or eddy current testing to check for internal and surface defects.
Hydrostatic Testing: Each pipe is tested to a specified pressure to ensure integrity.
Mechanical Tests: Tensile tests, impact (Charpy) tests to verify toughness.
Chemical Analysis: Verification of the material composition.
Visual and Dimensional Inspection.
Common Applications
Due to their reliability, EN 10216-2 pipes are used in critical industries:
Power Generation: Boiler tubes, superheater tubes, main steam lines, and feedwater lines in fossil fuel and biomass power plants.
Petrochemical Industry: Refinery piping, heat exchangers, and catalytic crackers.
Oil & Gas: High-pressure flow lines and processing equipment.
Heating Systems: Piping for high-pressure district heating systems.
Comparison with Other Key Standards
It's helpful to understand how EN 10216-2 relates to other common pipe standards.
| Feature | EN 10216-2 | EN 10216-1 | ASTM A106 / ASME SA106 |
|---|---|---|---|
| Scope | Seamless tubes for pressure, elevated temperature | Seamless tubes for pressure, room temperature | Seamless carbon steel pipe for high-temperature service |
| Temperature Focus | High-Temp Properties Specified | Room-Temp Properties Specified | High-Temp Properties Specified |
| Common Grades | P235GH, P265GH, 10CrMo9-10 | P235TR1, P235TR2 | Grade A, B, C |
| Regional Use | European / International | European / International | Primarily North American |
| Equivalent | Similar to ASTM A335 for alloy grades | Similar to ASTM A53 or API 5L for some applications | Similar to EN 10216-2 for carbon steel grades |
Key Difference between EN 10216-1 and EN 10216-2:
EN 10216-1 is for pipes used at ambient/room temperature. Its properties are guaranteed at 20°C.
EN 10216-2 is for pipes used at elevated temperatures. Its properties are guaranteed at the elevated service temperature (e.g., 300°C, 500°C).
Conclusion
EN 10216-2 is a fundamental standard for engineers and procurers in the energy and process industries. It guarantees that the seamless steel pipes used in their projects have the verified material properties and quality controls necessary for safe and reliable long-term operation under high pressure and temperature.
When sourcing these pipes, always ensure you receive a mill test certificate (MTC) or 3.1/3.2 inspection certificate, which provides traceability and proves the product's compliance with the standard.





