Mar 03, 2026 Leave a message

EN S355J2H Longitudinal submerged arc welding Pipe

info-252-200info-259-194

EN S355J2H steel is a widely used and standard high-strength structural grade for manufacturing Longitudinal Submerged Arc Welded (LSAW) pipes. It is specifically designed for applications requiring a guaranteed minimum yield strength of 355 MPa combined with assured toughness at sub-zero temperatures down to -20°C . The finished pipe is manufactured to the EN 10219 product standard for cold-formed welded structural hollow sections .

Here is the detailed specification for an EN S355J2H LSAW pipe.

Key Specifications

Attribute Description
Material Standard EN 10025-2: Hot-rolled products of structural steels. This standard specifies the technical delivery conditions for the steel plate .
Steel Grade S355J2H: A high-strength structural steel grade. The "355" indicates the minimum yield strength in MPa. The suffix "J2" denotes a specified minimum impact energy of 27 Joules at -20°C . The "H" indicates a hollow section conforming to EN 10219 .
Product Standard EN 10219-1 / -2: Cold-formed welded structural hollow sections of non-alloy and fine grain steels. This is the governing standard for the finished LSAW pipe product, covering all technical delivery conditions, tolerances, and testing requirements .
Process LSAW (Longitudinal Submerged Arc Welding) : Pipes are manufactured by forming steel plates into a cylinder (using UOE, JCOE, or RBE technology) and welding the longitudinal seam both internally and externally using a submerged arc process. This process is well-suited for producing large-diameter pipes with thick walls .
Chemical Composition (max %)  
  Carbon (C): 0.22
  Manganese (Mn): 1.60
  Phosphorus (P): 0.030
  Sulfur (S): 0.030
  Silicon (Si): 0.55
Mechanical Properties (min)  
  Yield Strength (t ≤ 16mm): 355 MPa
  Yield Strength (16mm < t ≤ 40mm): 345 MPa
  Tensile Strength (t ≤ 40mm): 470-630 MPa
  Elongation: 20%
Impact Properties Charpy V-notch Impact Energy: 27 J minimum at -20°C
Typical Size Range  
  Outside Diameter: 219 mm to 2134 mm (8" to 84")
  Wall Thickness: 5.0 mm to 60 mm (up to 80 mm available from some manufacturers)
  Length: 3 m to 18.3 m (up to 75 m available for specific applications like piling)
Manufacturing Steps 1. Steel plate selection and edge milling.
2. Edge crimping.
3. Forming using JCOE or UOE processes.
4. Internal and external submerged arc welding.
5. Mechanical expanding (for UOE/JCOE).
6. Non-destructive testing (Ultrasonic, X-ray).
7. Hydrostatic testing.
8. End facing and beveling.
Common Applications Offshore platforms; marine structures; high-load piling foundations; bridge construction; high-rise building support columns; wind power towers; structural frames in cold climates; applications requiring guaranteed low-temperature toughness.
Certification Mill Test Certificate typically to EN 10204 / 3.1 .

Understanding the Grade Designation

The designation S355J2H follows a logical structure defined in EN 10219 and EN 10025 :

Component Meaning
S Structural Steel
355 Minimum yield strength of 355 MPa (for thicknesses ≤ 16mm)
J2 Impact test requirement: 27 Joules minimum at -20°C
H Hollow Section (conforms to EN 10219)

Advantages of EN S355J2H LSAW Pipe

Advantage Description
High Strength Minimum yield strength of 355 MPa – significantly higher than S275 grades, allowing for thinner walls or higher load capacity in structural designs .
Excellent Low-Temperature Toughness The "J2" suffix guarantees a minimum impact energy of 27 Joules at -20°C, ensuring adequate toughness for demanding environments like offshore platforms, cold climates, and winter construction .
Good Weldability Controlled chemistry (low carbon equivalent) ensures excellent weldability for field joining and fabrication, which is critical for structural applications .
Large Diameter Capability LSAW process enables production of large-diameter pipes (up to 84"+) ideal for major construction and infrastructure projects .
Thick Walls Available with wall thicknesses up to 60-80 mm, providing exceptional load-bearing capacity for demanding applications like deep foundation piling .
Dimensional Accuracy Modern JCOE and UOE forming processes provide precise control over pipe dimensions, ensuring consistent quality and ease of installation .
Proven in Major Projects Extensively used in offshore platforms, bridge construction, and large-scale infrastructure projects worldwide .

European Standards Framework

The European system separates the material standard (what the steel is made of) from the product standard (how the finished pipe is made and tested) :

EN 10025-2 is the material standard for hot-rolled structural steel. It defines the chemical and mechanical properties of the steel plate itself .

EN 10219 is the product standard for cold-formed welded structural hollow sections. It specifies the manufacturing process (like LSAW), dimensional tolerances, and testing requirements for the final pipe product .

Therefore, a complete specification for this pipe would be "EN 10219 LSAW pipe in steel grade S355J2H" . Major manufacturers such as Severstal list S355J2H as a standard offering in their EN 10219 LSAW pipe production range .

Summary

In conclusion, EN S355J2H LSAW pipe is a premium, well-established high-strength structural steel pipe manufactured to the EN 10219 product standard. It combines a minimum yield strength of 355 MPa with guaranteed low-temperature toughness of 27 Joules at -20°C, making it the preferred choice for the most demanding structural applications including offshore platforms, marine structures, bridge construction, high-rise buildings, and deep foundation piling in cold climates . The LSAW manufacturing process enables production of large diameters (up to 84"+) with thick walls (up to 60-80 mm), providing exceptional load-bearing capacity for major infrastructure projects. When specifying, reference both the product standard and the grade (e.g., EN 10219 S355J2H LSAW pipe) to ensure the pipe meets all requirements for its intended use.

 

Send Inquiry