EN 10297-1 is the European standard for hot-finished seamless steel tubes for mechanical and general engineering purposes. 42CrMo4, the most widely specified chromium-molybdenum grade in this standard, delivers a combination of high strength, hardenability and toughness that makes it the default choice for shafts, drill components, gears and other highly stressed machine parts. This article details the chemistry, mechanical properties, heat treatment and testing requirements of 42CrMo4 tubes per EN 10297-1.
Chemical Composition
42CrMo4 is a quenched-and-tempered chromium-molybdenum steel. The molybdenum addition improves hardenability and high-temperature strength, while chromium provides through-hardening and wear resistance. The limiting composition per EN 10297-1 is given in the table below.
| Element | C | Si | Mn | P max | S max | Cr | Mo |
|---|---|---|---|---|---|---|---|
| Content (wt%) | 0.38-0.45 | 0.40 max | 0.60-0.90 | 0.025 | 0.035 | 0.90-1.20 | 0.15-0.30 |
Mechanical Properties After Quenching and Tempering
42CrMo4 tubes are supplied in the quenched and tempered condition (+QT) unless another condition is agreed. Typical guaranteed values for small wall thicknesses are listed below; the exact values for a given size are taken from the standard's table by wall thickness group.
| Property | Value |
|---|---|
| Tensile strength Rm | 900-1100 MPa |
| Yield strength Rp0.2 | 700 MPa min |
| Elongation A | 12% min (longitudinal) |
| Impact energy KV | 27 J min at room temperature, per agreed testing |
| Hardness (typical as supplied) | 260-320 HBW depending on condition |
Hardenability is verified by the Jominy end-quench test per ISO 642; 42CrMo4 achieves a hardened depth of about 25 mm at 50 HRC under standard test conditions, which is why it is chosen for components that must be hardened after machining.
Manufacturing and Heat Treatment
42CrMo4 tubes per EN 10297-1 are produced by hot rolling or hot extrusion of rolled or forged billets, then heat treated. The standard heat treatment is quench hardening from 850-880 C followed by tempering at 550-650 C. Tempering temperature governs the final hardness and toughness trade-off: lower tempering temperatures give higher hardness, higher tempering gives better toughness. For applications that need tighter dimensional accuracy, the tubes can be further processed by cold drawing or precision turning.
Dimensional Tolerances
Dimensions and tolerances follow EN 10297-1. For hot-finished tubes the outside diameter tolerance is normally about plus 1% to minus 0.5% depending on the size group, and wall thickness tolerance is about plus 12.5% to minus 10% unless a stricter class is agreed. Where precision is required, cold-drawn 42CrMo4 can be supplied to much tighter tolerances, typically plus 0.05 to 0.10 mm on outside diameter. The agreed tolerance class should always be stated in the order.
Applications and Limitations
Typical uses of 42CrMo4 seamless tubes include oilfield drill collars and subs, submarine and offshore components, aircraft landing gear parts hardened to 45-50 HRC, heavy-duty shafts, pinions, hydraulic cylinders and press components. The grade is not intended for service above about 600 C, where chromium-molybdenum carbides begin to coarsen and reduce creep strength, and welding must be followed by post-weld heat treatment at 600-650 C to restore the mechanical properties of the heat-affected zone.
Quality Validation and Certification
Tensile testing per EN ISO 6892-1 on each heat and condition
Impact testing per ISO 148-1 where impact requirements apply
Hardness testing and, where specified, Jominy hardenability per ISO 642
100% ultrasonic examination per EN ISO 10893-11 for critical service, or per the agreed acceptance level
Magnetic particle inspection per ISO 10893-8 for surface verification
Certification per EN 10204 3.1 as standard, 3.2 with an independent inspection body
FAQ
What does 42CrMo4 mean?
Per EN 10027-2, 42CrMo4 designates a steel with 0.42% mean carbon content, chromium and molybdenum as the main alloying elements with 1% mean chromium, and a molybdenum content around 0.25%. The designation groups it in the quenched-and-tempered alloy steel family.
What is the yield strength of 42CrMo4 in the quenched and tempered condition?
Per EN 10297-1, the specified minimum yield strength Rp0.2 is 700 MPa for the +QT condition, with tensile strength 900-1100 MPa and minimum elongation 12% for small wall thicknesses.
Is 42CrMo4 supplied seamless or welded?
EN 10297-1 covers hot-finished seamless tubes only, so 42CrMo4 to this standard is always seamless. It can be supplied hot-rolled, hot-extruded, or further cold-drawn for precision applications.
Can 42CrMo4 tubes be welded?
Yes, with precautions: the steel must be preheated and welded with a matching low-hydrogen procedure, and post-weld heat treatment at 600-650 C is required to restore hardness and toughness. Welding without PWHT leaves a hard, crack-sensitive heat-affected zone.
What is the maximum service temperature for 42CrMo4?
The grade is designed for mechanical components rather than high-temperature service. Above about 600 C, carbide coarsening reduces strength and creep resistance, so other Cr-Mo heat-resistant grades should be selected for such duty.
What tests are mandatory for 42CrMo4 tubes per EN 10297-1?
Mandatory testing includes chemical analysis, tensile testing, and where required by the order, impact and hardness tests. Supplementary requirements can add ultrasonic examination per EN ISO 10893-11, magnetic particle inspection per ISO 10893-8 and certification per EN 10204 3.1 or 3.2.





