

DIN 2391 - Cold Drawn Seamless Precision Steel Tubes
DIN 2391 is a German standard for cold-drawn seamless precision steel tubes with tight dimensional tolerances. These tubes are used for hydraulic cylinders, mechanical components, and precision applications rather than fluid transport.
Key Features
| Feature | Description |
|---|---|
| Standard | German Industrial Standard for precision tubes |
| Process | Cold-drawn seamless (high dimensional accuracy) |
| Primary Use | Mechanical components, hydraulic cylinders, bearings |
| Key Property | Excellent surface finish and tight tolerances |
Material Grades
| Grade | Similar to | Material Type | Typical Use |
|---|---|---|---|
| St 35 | 1020/1026 | Mild carbon steel | General mechanical parts |
| St 52 | 1045 | Medium carbon steel | High-strength components |
| C 35 | 1035 | Carbon steel | Gears, shafts |
| C 45 | 1045 | Medium carbon steel | Bearings, rollers |
| 42CrMo4 | 4140 | Alloy steel | High-strength, heat-treatable parts |
Dimensional Tolerances
Outside Diameter Tolerance:
| Tolerance Class | Tolerance (± mm) | Application |
|---|---|---|
| h8 | Very tight | Precision bearings, hydraulic cylinders |
| h9 | Standard precision | General mechanical components |
| h10 | Commercial precision | Less critical applications |
Wall Thickness Tolerance:
Typically ±10% of nominal wall
Special tolerances available (±5% or better)
Surface Finish
| Finish Quality | Roughness (Ra) | Typical Application |
|---|---|---|
| Standard | 3.2-6.3 μm | General mechanical parts |
| Precision | 1.6-3.2 μm | Hydraulic cylinders |
| High Precision | 0.8-1.6 μm | Precision guides, bearings |
| Special | <0.8 μm | Optical, measuring equipment |
Mechanical Properties
As-Delivered (Cold-Drawn):
| Grade | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (%) |
|---|---|---|---|
| St 35 | ≥ 235 | 340-470 | ≥ 25 |
| C 45 | ≥ 490 | 690-850 | ≥ 14 |
| 42CrMo4 | ≥ 700 | 900-1100 | ≥ 12 |
Heat-Treated Conditions Available:
Normalized
Quenched & Tempered (for alloy steels)
Stress-relieved (for machining stability)
Manufacturing Process
text
Hot-rolled seamless tube → Pickling/Cleaning → Cold Drawing → Heat Treatment (if specified) → Straightening → Cutting → Final Inspection
Cold Drawing Benefits:
Tight dimensional control
Excellent surface finish
Increased strength (work hardening)
Good straightness
Testing Requirements
| Test | Requirement |
|---|---|
| Tensile Test | Per heat or batch |
| Hardness Test | Optional/specified |
| Flattening Test | For verification of ductility |
| Hydraulic Test | Optional (not for pressure service) |
| Surface Inspection | Visual for defects |
| Dimensional Check | 100% verification of key dimensions |
Applications
Hydraulic Industry:
Cylinder barrels and piston rods
Hydraulic manifolds and valve bodies
Accumulator shells
Mechanical Engineering:
Linear guides and shafts
Bearing sleeves and bushings
Gear blanks and pinions
Rollers for conveyors
Automotive:
Shock absorber cylinders
Steering columns
Drive shafts
Fuel injection components
General Industry:
Printing machine rollers
Textile machine shafts
Machine tool spindles
Robotic arm components
Advantages
Precision Dimensions: Ideal for machining with minimal stock removal
Excellent Surface: Reduces finishing operations
Material Variety: Wide range of steel grades available
Consistent Quality: Tight process control ensures uniformity
Cost-Effective: Reduces machining time and material waste
Comparison with DIN 2391 Parts
| Part | Description | Features |
|---|---|---|
| DIN 2391 Part 1 | General requirements | Basic specifications |
| DIN 2391 Part 2 | Hydraulic applications | Special requirements for cylinders |
| DIN 2391 Part 3 | Heat-treated tubes | For quenched & tempered steels |
Ordering Information
Typical Designation:
text
DIN 2391 - Grade - Dimensions - Tolerance Class - Condition Example: DIN 2391 - C45 - 50 x 5 mm - h8 - normalized
Required Specifications:
Material grade (e.g., St 35, C45, 42CrMo4)
Dimensions: OD × Wall × Length
Tolerance class (h8, h9, h10)
Heat treatment (as-drawn, normalized, Q&T)
Surface finish requirements
Special requirements (straightness, testing)
Equivalent Standards
| Region | Equivalent Standard | Key Differences |
|---|---|---|
| ISO | ISO 3304 | International equivalent |
| ASTM | A519 | Similar but different tolerance system |
| Japan | JIS G3445 | Similar precision mechanical tubes |
| China | GB/T 3639 | Chinese precision tube standard |
Important Notes
Not for Pressure Service:
DIN 2391 tubes are NOT certified for pressure applications
For pressure piping, use DIN 2448 or EN 10216
For boiler tubes, use DIN 17175
Machining Considerations:
Stress-relieved condition recommended for complex machining
Allow for grinding/machining if highest precision needed
Consider honing for hydraulic cylinder applications
Quality Classes
| Class | Description | Typical Use |
|---|---|---|
| Class I | Standard quality | General mechanical parts |
| Class II | Improved quality | Hydraulic applications |
| Class III | Special quality | Precision instruments |
| +C | Cleanliness controlled | Hydraulic, food industry |
In summary: DIN 2391 specifies cold-drawn seamless precision tubes for mechanical applications requiring excellent dimensional accuracy, surface finish, and material consistency. It is the German/European standard of choice for hydraulic cylinders, precision shafts, and other mechanical components where tight tolerances and good machinability are critical.





