Aug 19, 2025 Leave a message

‌Differences Between Electric & Manual Butterfly Valves‌

1. Functional Comparison‌

‌Type‌ ‌Electric Butterfly Valve‌ ‌Manual Butterfly Valve‌
‌Drive Mechanism‌ Electric actuator (motor-driven) Handwheel/lever operation
‌Environment‌ Unsuitable for humid conditions Adaptable to most environments
‌Applications‌ Large-diameter pipelines, corrosive/abrasive media General industrial use (oil, gas, water, etc.)
‌Control‌ Remote/automated operation with higher torque Quick 90° rotation for on/off control

Electric Actuated Butterfly Valve

‌2. Installation Requirements‌

 

‌Electric Butterfly Valve‌

‌Pipe Support‌: Requires reinforced flange connections and pipeline supports to avoid radial stress

‌Alignment‌: Flow direction must match valve body arrow marking

‌Accessibility‌: Install at ergonomic height (1.2–1.5m) for maintenance access

‌Accessories‌: Large-diameter valves need bellows compensators on one end

 

‌Manual Butterfly Valve‌

‌Orientation‌: No flow direction restriction (except for companion expansion joints)

‌Positioning‌: Handwheel at chest height (~1.2m) for optimal leverage

‌Pre-Installation‌:

Clean valve/pipeline interiors thoroughly (zero particulate tolerance)

Verify material compatibility with process media

‌Mounting‌:

Wafer-type: Install between flanges with uniform bolt torque

Lug-type: Direct flange bolting permitted

‌Manual Triple Offset Butterfly Valves

3. Technical Notes‌

‌Common Features‌:

90° disc rotation (0°=closed, 90°=full open)

Compact design with low pressure drop

‌Industry Standards‌:

API 609 (fire-safe design)

ISO 5752 (face-to-face dimensions)

Send Inquiry